Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

Omron STC-SBE132POE (STCSBE132POE) 1.3MP GigE, Monochrome Camera (CMOS Sensor: EV76C560ACT-EQV) Main Image Front and Back

Omron STC-SBE132POE (STCSBE132POE) 1.3MP GigE, Monochrome Camera (CMOS Sensor: EV76C560ACT-EQV)

Omron STC-SC133POEHS 1.3MP Color GigE Camera Main Image Front and Back

Omron STC-SC133POEHS 1.3MP Color GigE Camera

Omron STC-SCE132POE (STCSCE132POE) 1.3MP GigE, Color Camera

Omron's STC-SCE132POE is part Power over Ethernet GigE cameras, featuring an eV2 CMOS Sensor. It also features a 1/1.8" monochrome QSXVGA sensor, 61 fps, and communication over a 6 pin Hirose or Ethernet connector (CMOS Sensor: EV76C560ACT-EQV)
SKU
STC-SCE132POE

The STC-SCE132POE boasts a compact 35(w) x 35(H) x 54.3 (D) mm size. This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoE series is available now at an extremely low cost.


Features:

  • 1.1/8" e2v CMOS Sensor
  • SXVGA: 1280 (H) x 1024 (V)
  • 1.2 GenICam 1.4 Compliant


Applications:

  • Industrial Applications
  • Medical Applications
  • Factory Automation
  • Industrial Inspection

  Imaging

 

Model No

STC-SCE132POE

Image Sensor

1/1.8" 1.3MP Color CMOS (e2V: EV76C560ACT-EQV)

Active Picture Element

1280 (H) x 1024 (V)

Cell Size

5.3 (H) x 5.3 (V) µm

  Function

 

Scanning System

Full scanning, Variable ROI

Shutter Type

Global Shutter

Scan Mode

Full Scan / AOI

Vertical Frequency (Frame Rate)

SXVGA: 1280 (H) x 1024 (V): 61 FPS

Video Output

Mono8, Mono10, Mono10Packed, BayerRGB8, BayerRGB10, BayerRGB10Packed, RGB8Packed

- Noise Level: @ 10 bit output

<= 12 Digit (Gain 0 dB) 

Minimum Scene Illumination

TBD Lux @ F1.2

ALC

AE and AGC (ON/OFF)

Exposure Time

Preset continuous mode: 10 useconds to 1,000,719 useconds Preset trigger mode: 10 useconds to 1,000,719 useconds

Gain

-

- Analog (Gain)

0 ~ 5.952 dB

- Digital (Gain)

0 ~ 6 dB

Gamma

Gamma 1.0 (Factory default) or uploadable gamma table (Default:1)

AOI Function

AOI (H: 32 to 1280 Pixel / V: 32 to 1024 Line) Unit: H 8 Pixel / V 2 Line

Binning

H: 1/2, V: 1/2

Decimation(Skipping)

Horizontal 1/2, 1/4, Vertical 1/2, 1/4

Flip Image

Horizontal

Pixel Blemish Correction

Maximum 64 points (Default:ON)

White Balance

Auto, Manual, Push to Set, White Balance are available, on both raw data and RGB outputs (Default:OFF)

Operating Mode

Free Run, Edge preset trigger, Trigger Width (Pulse width) (Default:OFF)

Protocol

IEEE802.3 (1000BASE-T)

Communication

GigE Vision® 1.2 and GenICam™ 1.4 Compliant

I/Os

One opt-isolated input and two open collector outputs(+3.3V)

Power

-

- Input Voltage

+10.8 to +26.4 Vdc (IO Connector) or Power Over Ethernet(IEEE802.3af compliance) 

- Consumption

Less than TBD W

  Mechanical

 

Dimensions

-

- C-Mount Color:

35 (W) x 35 (H) x 54.3(D) mm excluding connectors

- CS-Mount Color:

35 (W) x 35 (H) x 49.3(D) mm excluding connectors

Optical Filter

With IR Cut Filter

Optical Center Accuracy

Positional accuracy in H and V directions:: ±0.3 mm, Rotational accuracy of H and V: ±1.0 deg

Material

Aluminum (AC)

Lens Mount

C-Mount, CS-Mount

Connectors

RJ45 connector, Power- I/O connector: HR10A-10R-6PB (Hirose) or equivalent

Camera Mount Screws

Two 1/4'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate)

Weight

Approx. 100g

  Environmental

 

Operating Temperature

-

- Minimum

Environmental Temperature: -5°C

- Maximum

Camera housing temperature (top plate) shall not exceed 40°C, (This corresponds to an environmental temperature of approximately 62°C)

Storage Temperature

Environmental Temperature -30 ~ 65°C

Vibration

20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each

Shock

Acceleration: 38G, half amplitude 6 ms, 3 times, XYZ each direction

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011

RoHS

RoHS Compliant