(888) 687-6877




You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Sentech STC-SC500POE Color GigE | GigE Cameras Image #1
  • Sentech STC-SC500POE Color GigE | GigE Cameras Image #2
  • Sentech STC-SC500POE Color GigE | GigE Cameras Image #3
  • Sentech STC-SC500POE Color GigE | GigE Cameras Image #4

Sentech STC-SC500POE 5MP Color GigE Camera

Quick Overview

The STC-SC500POE is 2448 pixels x 2058 pixels, 2/3" PS IT CCD, 15 fps, Power over Ethernet Gigabit Ethernet Camera.

The STC-SC500POE is part of Sentech's Brand New Power over Ethernet GigE camera series. It features a 2/3" color UXGA sensor, 15fps and communication over a 6 pin Hirose or Ethernet connector. The STC-SC500POE boasts a compact 35(w) x 35(H) x 55.9 (D) mm size, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoE series is available now at an extremely low cost.

  • User Programmable AOI
  • Power Over Ethernet
  • 5.0 Megapixel Resolution with 15 fps


STC-SC500POE Specifications
Imager 2/3" interline QSXGA color progressive CCD: ICX625AQ
Total Picture Element 2536 (H) x 2068 (V)
Active Picture Element QSXGA: 2448 (H) x 2058 (V)
Cell Size 3.45 (H) x 3.45 (V) µm
Scanning System Progressive
Vertical Frequency (Frame Rate) 15.18586 Hz at full resolution 0.48175 to 60.71422 Hz adjustable via the communication (Frame rate depends on the AOI setting.) Maximum frame rate (60.71422 Hz) is when vertical resolution AOI setting is 128.
Horizontal Frequency 31.1284 kHz
Pixel Frequency 81.8182 MHz
Noise Level
@ 8bit output
≤ 4 Digit (Gain 0 dB)
@ 10bit output
≤ 15 Digit (Gain 0 dB)
@ 12bit output
≤ 60 Digit (Gain 0 dB)
Minimum Scene Illumination TBD Lux at F1.2, 15Hz
Sync System Internal
Video Output Digital 8, 10 or 12 bit Raw data or RGB 8 bit
Interface PoE : IEEE802.3af CLASS2 (1000BASE-T)
Protocol GigE Vision® 1.2 and GenICam™ 2.0 compliant
Exposure Time Preset continuous mode: 10 useconds to 16,777,215 useconds Preset trigger mode: 10 useconds to 16,777,215 useconds Pulse width mode: 10 useconds to Unlimited
Gain 0 to 18.309 dB
Gamma Gamma 1.0 (Factory default) or uploadable gamma table
AOI Function Variable AOI setting via the communication
Smear Reduction Selectable ON/OFF via the communication
Color Interpolation Available on RGB Output
White Balance Function Auto, Manual, Push to Set White Balance are available on both raw data and RGB outputs
Operation Mode Edge preset trigger, Pulse width trigger (unlimited long exposure)
Communication UART communication through Ethernet port
I/Os One opt isolated input and two open collector outputs
Input Voltage
+10.8 to +26.4 Vdc via power-I/O connector or Power over Ethernet (Power-I/O connector power supply is prioritized.)
12V: 4.1W / 3.5W, PoE: 4.5W / 3.8W
Dimensions 35 (W) x 35 (H) x 55.9(D) mm excluding connectors
Optical Filter IR Cut Filter on
Optical Center Accuracy Positional accuracy in H and V directions: +/- 0.3 mm Rotational accuracy of H and V: +/- 1.5 deg.
Material Aluminum (AC)
Lens Mount C mount
Connectors RJ45 connector; Power/IO connector: HR10A-10R-6PB (Hirose) or equivalent
Camera Mount Screws Two 1/4” Tripod screw holes: (One on each top and bottom plate), Twelve M4 screws holes: (Four on each top and bottom plate, two on each side plate)
Weight Approx. 130
Operating Temperature
Environmental Temperature -5°C
Camera housing temperature (top plate) shall not exceed 65⁰C (This corresponds to an environmental temperature of approximately 35°C)
Storage Temperature Environmental Temperature: -30°C to 65°C
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 38G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011
RoHS RoHS Compliant


No Video available

Request a Quote

* Required Fields