Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

Omron STC-MCE132U3V 1.3MP (60FPS) USB3, Color Camera

Omron STC-MCE132U3V 1.3MP (60FPS) USB3, Color Camera

Omron STC-MCS163U3V (STCMCS163U3V) 1/2.9 inch CMOS 1.6 megapixel USB Camera

Omron STC-MCS163U3V (STCMCS163U3V) 1 / 2.9 inch CMOS 1.6 megapixel USB camera

Omron STC-MBS163U3V (STCMBS163U3V) 1/2.9 inch CMOS 1.6 megapixel USB Camera

Sentech's STC-MBS163U3V is a USB, CMOS camera with global shutter. (Sony: IMX273) The cameras come in both color and monochrome.

Color - STC-MCS163U3V
Monochrome - STC-MBS163U3V

SKU
STC-MBS163U3V

Sentech STC-MBS163U3V


Features:

  • 1 / 2.9 inches 1.6 million pixels CMOS sensor 
  • realize low cost CMOS sensor employing 
  • USB3.0 high pixel digital output 
  • micro case type profile 28mm x 28mm 
  • resolution 1,440 × 1,080Pixel output corresponding 
  • frame rate 238.0 fps (8 bits), 118.1 fps (10 bits), 117.3 fps (12 bits) 
  • Supports Windows XP, VISTA, 7, 8 and 10 (32 bits / 64 bits each) 
  • Linux compatible (partially compatible) driver 

 

Applications:

  • Security
  • Machine Vision
  • Industrial Inspection
  • Industrial Imaging
Specifications
Model STC-MCS163U3V (color) STC-MBS163U3V (black and white)
Image sensor 1 / 2.9 "1.58M pixel color CMOS 
(SONY: IMX273)  spectral distribution graph
1 / 2.9 "1.58M pixel monochrome CMOS 
(SONY: IMX273)  spectral distribution graph
Shutter type global
Effective number of pixels 1,440 (H) x 1,080 (V)
Cell size 3.45 (H) x 3.45 (V) μm
Synchronization method External trigger (hard / soft) / free run
Frame rate 
(at full resolution)
8 bits output 238.0 fps (frame rate priority) / 200.5 fps (image quality priority)
10 bits output 118.1 fps
10 bits packed output 183.8 fps
12 bits output 117.3 fps
12 bits packed output 157.5 fps
ADC bit width 10 bits / 12 bits
Video output format 8 bits / 10 bits / 12 bits output (compatible with 10 bits packed / 12 bits packed)
Noise level 8 bits output ≤ 6 digits (Gain 0 dB, frame rate priority) / ≤ 3 digits (Gain 0 dB, image quality priority)
10 bits / 10 bits Packed ≤ 12 digits (Gain 0 dB))
12 bits / 12 bits Packed ≤ 48 digits (Gain 0 dB)
sensitivity 8 bits (frame rate priority): 240 Lux 
8 bits (image quality priority) / 10 bits / 12 bits: 960 Lux
8 bits (frame rate priority): 108 Lux 
8 bits (image quality priority) / 10 bits / 12 bits: 430 Lux
Exposure time 8 bits output 1 μs to 16,777s (default: 4,05736 ms)
10 bits output
10 bits packed output
12 bits output
12 bits packed output
gain Analog gain 0dB to 19.2dB
Digital gain 1 to 2 times (default: 1 time)
Black level 8 bits output 0 to 31 digits
10 bits / 10 bits Packed 0 to 127 digits
12 bits / 12 bits Packed 0 to 511 digits
White balance gain 0 (black level equivalent) to 3.99 times (initial value: 1 time) None
ROI Horizontal: 64 to 1,440 pixels (1,408 pixels at packed) / vertical: 4 to 1,080 lines 
(initial value: 1,440x1,080) 
Image size adjustment unit: horizontal 16 pixels (64 pixels at packed) / vertical four line 
image offset adjustment : 4 horizontal pixels / 4 vertical lines
Multi-ROI 4 areas (2 horizontal areas x 2 vertical areas)
gamma Gamma Table: 0.1 to 4.0 (Default: 1.0)
Binning incompatible x2 Horizontal / Vertical Individual setting possible / Off 
(horizontal is average, vertical is addition)
Decimation x2 Horizontal / Vertical Individual setting possible / Off
Video reverse function Horizontal flip / Vertical flip / Vertical flip left / right / Off
Pixel defect correction Up to 2,048 points
Automatic image quality control Auto exposure Correspondence Correspondence
Automatic gain (AGC) Correspondence Correspondence
Auto white balance Correspondence -
action mode Edge preset trigger / pulse width trigger / start / stop trigger / free run
Save user settings Correspondence
interface USB 3.0 Super speed (USB 3.0 Micro B)
protocol USB3 Vision® 1.0.1, GenICam Standard Version 2.0 (SFNC 2.2, PFNC 2.0) compliant 
and Sentech proprietary protocol (when using Standard SDK, Trigger SDK)
Input / output signal terminal 3 GPIO, 1 camera hard reset
Power supply Input voltage +5 V (typ.) (According to USB standard)
power consumption Maximum: 3.8 W, Average: 3.4 W
External dimensions C-mount: 28 (W) x 28 (H) x 40 (D) mm * connector not included 
Optical filter IR Cut Filter None
Lens mount C mount
Optical axis accuracy Horizontal / Vertical position accuracy: ± 0.3 mm 
Rotation accuracy of effective pixel plane to horizontal / vertical direction: ± 1.5 °
Material Aluminum alloy (AC)
External connector USB connector: USB 3.0 
Micro B type input / output signal connector: HR10A-7R-6PB (Hirose) or equivalent 
Cable side connector: HR10A-7P6S (Hirose) recommended
Camera attachment M2 mounting screw holes (3 each on the entire surface) 
M4 mounting screw holes (2 on the top, 4 on the bottom)
weight About 46 g
Operating temperature 
/ humidity
lower limit Ambient temperature: 0 ° C, Ambient humidity: 0 to 85% RH (no condensation)
upper limit Enclosure temperature: +54 ° C, Ambient humidity: 0 to 85% RH (with no condensation)
Storage temperature / humidity Ambient temperature -25 to + 70 ° C, Ambient humidity 0 to 85% RH
Vibration resistance 20 Hz to 200 Hz to 20 Hz (5 minutes / cycle), acceleration 10 G, 30 minutes in each direction
Shock resistance Acceleration 38 G, 6 ms (sine half wave), XYZ 3 times in each direction
standard EMS: EN61000-6-2, EMI: EN55011
Regulatory chemical substance correspondence RoHS compliant