Aegis Sales Map

(888) 687-6877




You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Hitachi KP-FR31SCL | CamerLink Camera Image #1

Hitachi KP-FR31SCL

Quick Overview

Ultra Compact Cube Size Progressive Scan Mini-Camera Link Camera

By adopting a Camera Link digital interface, higher speed video data transfer is possible. Furthermore, by adopting the small connector (SDR) of a Mini Camera Link standard, the size of the camera has been reduced.

The data before image processing of a camera is transmitted in a RAW data output. Therefore, image processing is required after acquisition. Moreover, software for exclusive use is required.

High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications.

  • Ultra Compact Cube Size Camera
  • 1/3” Format Progressive Scan CCD
  • Primary RGB Color Filter
  • 659 x 494 Effective Pixels
  • Raw Color Output (unprocessed)
  • 500 TV lines of Resolution
  • 120 Frames / Second
  • CameraLink Output, Mini SCL Connector
  • SCL or PCL output
  • Selectable 8 or 10 bits / pixel
  • Frame-on-Demand Mode
  • RoHS Compliant
Imager: 1/3 inch Interline type Progressive Scan CCD
Pixels: 659 x 494
Cell Size: 7.4 x 7.4
Aspect Ratio: 4 : 3
Sensing Area: 4.88 x 3.66
Scanning system Progressive
Frame rate 120 frames/second (full pixel readout)
Scanning frequency

Horizontal: 62.94 kHz
Vertical: 119.88 Hz

Sync system Internal
Lens mount C mount
Flange focal distance 17.526 mm
Video output Digital output Camera Link Clk = 24.5454 MHz x 2TAP
Camera remote Camera Link control
Resolution Horizontal: 500 TV line
Vertical: 490 TV lines
Sensitivity 550 lx, F4, 3200 K
Minimum illumination 8.6 lx, F1.4, MAX GAIN
Signal noise to ratio 50 dB
Electronic shutter speed 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000, 1/50,000 second.Factory setting is off (1/120 second)or changeable by variable shutter (1/120 to 1/100,000 second)
Gamma compensation γ= 1
Frame on demand One trigger, fixed shutter and VD reset
Partial scan Selectable start position and width of picture grabbing in 1H step.
Gain setting 0 to +12 dB (Approx. 0.0358 dB step)
Ambient temperature Operating: 0 to + 40°C (+32 to +104ºF), less than 90 % RH
Storage: -10 to + 50°C (+14 to +122ºF), less than 70 % RH
Power supply voltage 12 ±1 VDC
Current consumption Approx. 210 mA (Approx. 2.4 W)
External dimensions 29 (W) x 29 (H) x 38 (D) mm
Mass Approx. 50 g


No Video available
Hitachi KP-FR31SCL
Request a Quote

* Required Fields