Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

Hitachi KP-F39SCL | Camera Link Camera Image #1

Hitachi KP-F39SCL

Hitachi KP-F230SCL | Cameralink Cameras Image #1

Hitachi KP-F230SCL

Hitachi KP-F80SCL

Mini-CameraLink Ultra-Compact Progressive Scan Black and White CCD Camera
SKU
Hitachi KP-F80SCL

By adopting a Camera Link digital interface, higher speed video data transfer is possible. Furthermore, by adopting the small connector (SDR) of a Mini Camera Link standard, the size of the camera has been reduced.

The small SDR connector for digital output allows the camera size to be drastically reduced to a 29 mm cube. This reduction in camera size permits use in vision systems where space is at a premium.

High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications.

  • 1/3 inch Ultra Compact Progressive Scan Camera
  • CameraLink Output, 10 bits per pixel using new SCL connector
  • 1034 x 779 effective pixels
  • 30 Frames per Second
  • 800 Lines of Resolution
  • 54 db S/N
  • 1.0 lux sensitivity
  • 12 pin Hirose connector for power
  • Frame-on-Demand Mode
  • RoHS Compliant
Imager: 1/3 inch Interline type Progressive Scan CCD
Pixels: 659 x 494
Cell Size: 7.4 x 7.4 [square lattice]
Aspect Ratio: 4 : 3
Sensing Area: 4.88 x 3.66
Scanning system Non-interlaced
Frame rate 60 frames/second (full pixel readout)
Scanning frequency

Horizontal: 31.468 kHz
Vertical: 60 Hz

Sync system Internal
Lens mount C mount
Flange focal distance 17.526 mm
Video output Digital output (CameraLink)
Data : Base configuration 10bit or 8bit x 1
CLK=24.5454MHz
Electronic shutter speed 1/60, 1/250, 1/500, 1/1000, 1/2000, 1/4000
  1/10000,1/50000 second
  factory setting is off (1/60 second) or variable shutter (minimum 1/100000 seconds)
Gamma compensation γ= 1
Frame on demand

(Remote setting (fixed shutter, one trigger, and reset control mode) Factory setting is all off.

Power supply voltage 12 ±1 VDC
Current consumption Approx. 160mA
Ambient temperature
Operation 0 to + 40 ºC (+32 to ; 104 ºF), less than 90 % RH
Storage -10 to + 50 ºC (+14 to +122 ºF), less than 70 % RH
* If operated continuously, be sure to use at less than +40 ºC (104 ºF) for
long term stable performance.
Vibration endurance 98 m/s2 (10 to 60Hz, amplitude: 0.98mm constant / 60 to 200Hz, amplitude: variable) (10 to 150Hz, sweep:1 min, XYZ, 30 min)
Shock endurance 686 m/s2 (Drop test, once each top, bottom, left and right)
External dimensions 29 (W)×29 (W)×29 (D) mm
Mass Approx. 53 g