The PXD digital frame grabber offers data rates high enough for the most demanding video capture applications. Compatible with single, dual or four channel cameras, the PXD comes with a camera configuration application that makes it one of the easiest machine vision components to set up and use.
  • PXD-1000-00
    • Interface for color and monochrome (RS422 & RS644) digital cameras.

PXD FAMILY Specifications
  • Input signal RS422 (up to 30 MHz per channel); EIA-644 (LVDS) (up to 40 MHz per channel)
  • Camera output Single channel: up to 32 bits/pixel and pixel rates to 40M pixels/sec for EIA-644 (LVDS) signals; Dual channel: up to 16 bits/pixel and up to 80M pixel/sec rates; Four channel camera at 8 bits/pixel and up to 160M pixels/sec rates
  • Camera connector Single connector has 100 pins
  • Camera power + 12V out at 800 mA and + 5V at 800 mA, available on user connector and camera connector
  • Supported Operating systems Win 98, ME, NT, 2000, XP
  • Supported Languages C / C++, C#, Visual Basic and Visual Basic .NET
Features
  • Image capture area Up to 32K x 32K pixels
  • Line scan camera image capture Up to 32K in width
  • Programmable frequency synthesizer Allows flexible synchronization
  • On-board memory 4MB image FIFO
  • Programmable debounced trigger
  • Programmable horizontal and vertical synchronization
  • Works with resettable and interlaced cameras
  • Strobe output Two strobes, programmable pulse-width and polarity can be used as camera exposure controls; TTL and RS422
  • General purpose I/O (TTL) Four, two-in and two-out
  • General purpose RS422 outputs Three, for camera control
  • Input look up tables (LUTs) 4x8:8 or 2x16:16, facilitates on-the-fly gamma correction, contrast, brightness, etc.
  • On-the-fly hardware pixel reordering for multi-channel cameras Two channel cameras: alternate pixels, alternate lines, alternate half-lines with normal/reverse scan; four channel cameras: alternate 1/4 lines with normal/reverse scan and quadrants with normal and reversed scans
  • Software image cropping Select region of interest, provides lower bandwidth
  • Optional interface cable Supplied for popular cameras
  • Optional cable kit Unsoldered connections on one end for other cameras
  • User connector Facilitates easy interface of strobes and triggers to external equipment
  • Camera configuration application Easy-to-use window for entering data for specific camera configuration. Available for Win 95/98/ME/NT/2000 only
  • Optional software protection
  • FCC(A) and CE approved
  • Compatible with CVB, Halcon, ActiVision Tools and Xcaliper
********************************************* The PXC analog frame grabber provides high-accuracy and low-pixel jitter for color and monochrome frame grabber processing. Complete with features normally only found in more expensive boards, the PXC is an easy-to-integrate value for industrial and commercial applications.
  • PXC-200AL
    • Low cost framegrabber for color and monochrome standard analog industrial cameras
  • PXC-200AF
    • Precision frame grabber for color and monochrome standard analog industrial cameras with Option Package

PXC FAMILY Specifications
  • Bus PCI bus master design for real-time image capture
  • Input video format NTSC, PAL, SECAM, S-video
  • Input video 1 V peak to peak, 75 ohms
  • Output formats Color: YcrCb 4:2:2 and 4:1:1; RGB 32, 24, 16, 15; Monochrome: Y8
  • Resolution NTSC: 640 x 480; PAL/SECAM: 768 x 576
  • Power + 5 VDC, 500 mA
  • Camera Power + 12 VDC output
  • Supported Operating systems Win 95 / 98 / ME, Win NT / 2000 / XP
  • Supported Languages C / C++, C#, Visual Basic and Visual Basic .NET
  Features
  • Sampling jitter Maximum of ± 4 ns relative to horizontal synchronization (for a stable source)
  • External trigger Input pulled by 10k ohm to 5 V, trigger requires a TTL pulse of 100 ns (minimum); software programmable edge or level sensitivity; software programmable polarity
  • Video noise < 1 LSB (least significant bit)
  • Video Multiplexer Standard product: four video inputs (only one can S-video); Standard product plus Optional Control Package: four video inputs, any or all of which can be S-video
  • Real time scaling With interpolation, plus horizontal and vertical cropping
  • DAC reference generator Eliminates inconsistency of AGC
  • FCC verification and CE marked
  • Compatible with CVB, Halcon, ActiVision Tools and Xcaliper
 

*********************************************

The PXR, a precision monochrome analog frame grabber can be used with progressive scan or resettable cameras for guaranteed grabs. Do you have an ISA bus? The CX is the right machine vision component for you with low level register access and video output with overlay.

  • PXR-800
    • Real time precision framegrabber for monochrome analog cameras (2 cameras)
  • PXR-801
    • Camera Extender Board (for 3 - 4 camera applications) for the PXR800

PXR FAMILY Specifications
  • Bus PCI bus master design for real-time image capture
  • Input composite video format Monochrome, RS-170 (NTSC), CCIR (PAL), interlace, progressive scan and resettable
  • Input video Software selectable termination (75 ohms or 10K ohms)
  • Resolution RS-170: 640 x 480 pixels (maximum 768 x 486 pixels); CCIR: 768 x 576 pixels; 256 gray level, 8 bit
  • Power + 5 VDC, PCI, 700 mA
  • Camera power + 12V at 1A for four cameras
  • Supported operating systems Win 98, 98-SE, 2000, ME, NT4, XP
  • Supported languages C/C++, C#, Visual Basic and Visual Basic .NET
  Features
  • Sampling jitter ± 2.6 ns with 1-line resync from reset; 0 using pixel clock input
  • Video noise <- 0.5 LSB (least significant bit)
  • Software programmable look up tables (LUTs) 256-byte programmable
  • External trigger Four optically isolated or TTL trigger inputs
  • Strobe and exposure output One strobe output, two exposure outputs (up to four pulses, up to 59.99 min)
  • General purpose input/output (I/O) Four TTL inputs, four TTL outputs
  • Video multiplexing Up to four video inputs (switch on trigger)
  • On-board memory 8MB image FIFO memory
  • Direct memory access (DMA) Dual mode -- incremental or burst options
  • Flexible memory allocation Through scatter/gather technology
  • ImageInfo "Stamps" images with complete image acquisition status information
  • Programmable linear offset and gain ­
  • Standard product Verified to FCC Part 15 Class A requirements. Full compliance to CE EMC standards (EN-55022, EN-55024, CISPR-22)
  • Software and manual CD included on first purchase
  • Compatible with CVB, Halcon, ActiVision Tools and Xcaliper