(888) 687-6877

SE HABLA ESPAÑOL

CONTACT US

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Watec WAT-902DM3S Hi-Res B/W CCTV Camera, 1/3" CS Mount, 570 TVL Image
  • Watec WAT-902DM3S Hi-Res B/W CCTV Camera, 1/3" CS Mount, 570 TVL Back Image

Watec WAT-902DM3S Hi-Res B/W CCTV Camera, 1/3" CS Mount, 570 TVL

Quick Overview

Watec WAT-902DM3S Hi-Res B/W CCTV Camera, 1/3" CS Mount, 570 TVL
Overview

Watec's WAT-902DM3S is a High Sensitivity, High Resolution, 570TVL camera with Reverse Image Function. The Watec WAT-902DM3S Features iclude AGC, BLC, Flickerless modes.

Specifications
Signal System
NTSC
Pick-up element
1/3 inch Interline transfer CCD image sensor
Number of total pixels
811 (H) X 508 (V) (EIA), 795 (H) X 596 (V) (CCIR)
Effective pixels
768 (H) X 494 (V) (EIA), 752 (H) X 582 (V) (CCIR)
Unit cell size 6.35μm (H) X 7.4μm (V) (EIA), 6.5μm (H) X 6.25μm (V) (CCIR)
Scanning system 2:1 interlace
Synchronizing system Internal
Video output Composite Video,1 Vp-p, 75ohm Unbalanced
Resolution(Horizontal) 570TV lines (center)
Minimum illumination 0.0012 lx. F1.4 (AGC HI)
Gamma Correction γ≒0.45(ON), 1.0 (Switchable with internal switch)
AGC Hi: 8~40dB, Lo: 8~22dB
S/N Ratio 52dB (AGC OFF=8dB, γ =1)
AE Mode Electronic iris: 1/60(EIA), 1/50(CCIR)~ 1/100000sec.
Flicker-less: shutter speed 1/100(EIA), 1/120(CCIR)
Back light compensation ON/OFF selectable
Lens mount CS-mount
Installation screw U 1/4inch (D=5mm) (Top/Bottom)
Connection terminal Video out (BNC), Power, Auto iris (Video/DC auto, selection)
Power supply DC +9.0~ 15.0V
Current Max. 120mA
Operating temperature -10℃ ~ +40℃ (w/o condensation)
Storage temperature -30℃ ~ +70℃ (w/o condensation)
Dimensions 35.5 (W) X 36.0 (H) X 64.0 (L)mm
Weight Approx. 90g
Accessories DC-plug (WPDC12), Iris-plug (AIC), Hex. wrench
No Video available
Watec WAT-902DM3S
Request a Quote

* Required Fields