Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

Watec 200DWW/MOD2 Water Resistant Camera Image

Watec 200DWW/MOD2 Water Resistant Camera

Watec WAT-100N EIA Hi-Res B/W Camera with Remote Controller, 1/2

Watec WAT-100N EIA Hi-Res B/W Camera with Remote Controller, 1/2" CS Mount, 570 TVL

Watec WAT-535EX2 Hi-Res B/W Camera, 570 TVL, 1/3" CS Mount

Watec WAT-535EX2 Hi-Res B/W Camera, 570 TVL, 1/3" CS Mount, internal and external sync

Inventory remaining is first come, first serve, so please do not delay should you require these cameras.

WAT-535EX2 EIA camera will be replaced with the WAT-3500

SKU
Watec WAT-535EX2

Watec WAT-535EX2 with High Sensitivity & External Synchronization w/ Manual Gain Control and external dipswitch adjustments. Watec WAT-535EX2 features include Internal sync. / external sync.(C. video, C. sync.), Manual gain control, Shutter speed control (10 steps), Electronic iris, Flickerless mode, Back light compensation, AGC, Manual gain control, Video/DC iris auto-select, Gamma correction, Iris level control.

Signal System
NTSC
Pick-up element
1/3 inch Interline transfer CCD image sensor
Number of total pixels
811 (H) X 508 (V) (EIA) / 795 (H) X 596 (V) (CCIR)
Effective pixels
768 (H) X 494 (V) (EIA) / 752 (H) X 582 (V) (CCIR)
Unit cell size 6.35μ m(H)×7.4μ m(V)(EIA), 6.5μ m(H)×6.25μm(V)(CCIR)
Scanning system 2:1 interlace
Synchronizing system Internal / External (Auto-select)
Video output Composite video, 1Vp-p, 75ohm Unbalanced
External Sync. System C. video / C. sync
External Sync. Signal Level Sync. Signal portion 0.2-5.0V(p-p)
Resolution(Horizontal) More than 570TVL (center)
Minimum illumination 0.003 lx. F1.4
S/N Ratio More than 54dB (AGC=5dB =1.0)
AE Mode

Fixed : 1/60, 1/100 sec. -- 1/50 - 1/120 sec.

1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/100000

EI : 1/60 - 1/100000 sec. -- 1/50 - 1/100000

AGC HI: 5 - 32dB / LO: 5 - 20dB
MGC 5 - 32dB
Gamma characteristics 0.45(ON) / 1.0(OFF)
Lens-iris Video / DC (EIAJ arrangement, Auto-select)
Back light compensation ON / OFF
Power Supply DC+12V±10%
Power Consumption  1.08W (90mA)
Operating temperature -10℃ ~ +50℃
Storage temperature -30℃ ~ +70℃
Operating / Storage humidity Less than 95% RH
Lens mount CS Mount (Back focus adjustable)
Weight Approx. 125g