Call Us Today: 888-687-6877

Watec WAT-127LH Hi-Res B/W Camera, 570 TVL, 1/2" CS Mount, int sync & Line lock, 12VDC/24VAC

Quick Overview

Watec WAT-127LH Hi-Res B/W Camera, 570 TVL, 1/2" CS Mount, int sync & Line lock, 12VDC/24VAC

Availability: In stock

More Views

Watec WAT-127LH Hi-Res B/W Camera, 570 TVL, 1/2" CS Mount, int sync & Line lock, 12VDC/24VAC.

  • Model: /w/a/wat-127lh.jpg

Additional Information

Overview

The Watec WAT-127LH is a B/W camera that can utilize both AC/DC supplies. The Watec WAT-127LH is also able to perform Line-Lock Type synchronization. The Watec WAT-127LH features include: Internal sync. / line lock (AC24V) auto select, DC12V / AC24V compatible, Shutter speed control, Flickerless mode, Back light compensation, AGC, Video/DC iris auto-select, Iris level control, Phase control.

Specifications
Quick Specs
WAT-127LH-NTSC
Signal System
NTSC
Pick-up element
1/2 inch Interline transfer CCD image sensor
Number of total pixels
811 (H) X 508 (V) (EIA) / 795 (H) X 596 (V) (CCIR)
Effective pixels
768 (H) X 494 (V) (EIA) / 752 (H) X 582 (V) (CCIR)
Unit cell size 8.4μ m (H) X 9.8μ m (V) (EIA), 8.6μ m(H) X 8.3μm (V) (CCIR)
Scanning system 2:1 interlace
Synchronizing system Internal/Line-lock automatic selection
Video output Composite video, 1Vp-p, 75ohm Unbalanced
Resolution(Horizontal) 570TV lines (Center)
Minimum illumination 0.0015 lx. F1.4 (AGC HI)
Gamma Correction r =0.45
AGC 5~42dB
S/N Ratio 50dB (AGC OFF)
AE mode EI (OFF - 1/100,000sec.) FL, OFF
Back light compensation ON
Lens Mount CS-mount
Installation Screw U 1/4 (D=5mm) (Top/Bottom)
Connection terminal Video out(BNC), Power, Auto iris, (Video/DC auto selection)
Power Supply DC12V 10% or AC24V 10%
Current Max. 200mA (DC12V), 85mA (AC24V)
Operating temperature -10℃ ~ +40℃
Storage temperature -30℃ ~ +70℃
Dimensions 43.5 (W) X 44.0 (H) X 67.5 (L)mm
Weight Approx. 140g
Accessories Iris-plug (AIC-G), Hex. wrench
Product Videos No
Accessories No

The Watec WAT-127LH is a B/W camera that can utilize both AC/DC supplies. The Watec WAT-127LH is also able to perform Line-Lock Type synchronization. The Watec WAT-127LH features include: Internal sync. / line lock (AC24V) auto select, DC12V / AC24V compatible, Shutter speed control, Flickerless mode, Back light compensation, AGC, Video/DC iris auto-select, Iris level control, Phase control.

Quick Specs
WAT-127LH-NTSC
Signal System
NTSC
Pick-up element
1/2 inch Interline transfer CCD image sensor
Number of total pixels
811 (H) X 508 (V) (EIA) / 795 (H) X 596 (V) (CCIR)
Effective pixels
768 (H) X 494 (V) (EIA) / 752 (H) X 582 (V) (CCIR)
Unit cell size 8.4μ m (H) X 9.8μ m (V) (EIA), 8.6μ m(H) X 8.3μm (V) (CCIR)
Scanning system 2:1 interlace
Synchronizing system Internal/Line-lock automatic selection
Video output Composite video, 1Vp-p, 75ohm Unbalanced
Resolution(Horizontal) 570TV lines (Center)
Minimum illumination 0.0015 lx. F1.4 (AGC HI)
Gamma Correction r =0.45
AGC 5~42dB
S/N Ratio 50dB (AGC OFF)
AE mode EI (OFF - 1/100,000sec.) FL, OFF
Back light compensation ON
Lens Mount CS-mount
Installation Screw U 1/4 (D=5mm) (Top/Bottom)
Connection terminal Video out(BNC), Power, Auto iris, (Video/DC auto selection)
Power Supply DC12V 10% or AC24V 10%
Current Max. 200mA (DC12V), 85mA (AC24V)
Operating temperature -10℃ ~ +40℃
Storage temperature -30℃ ~ +70℃
Dimensions 43.5 (W) X 44.0 (H) X 67.5 (L)mm
Weight Approx. 140g
Accessories Iris-plug (AIC-G), Hex. wrench