Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Omron STC-MCS241U3V (STCMCS241U3V) 2.3MP USB3, Color Camera
Utilizing CMOS Global Shutter, the Omron/Sentech STC-MCS241U3V is capable of capturing moving objects without any motion blur. By utilizing the user friendly USB 3.0 interface, speed and power have never been easier to use.
Features:
- 1936(H) x 1216(V) 145fps
- 5.86μm x 5.86μm 1/1.2”
Applications:
- Security
- Industrial
- Inspection
- Traffic Cameras
- In Car Videos
Imaging
|
Model No |
STC-MCS241U3V |
|
Image Sensor |
1/1.2" 2.35 MP Color CMOS (SONY: IMX174) |
|
Active Picture Element |
1920 (H) x 1200 (V) |
|
Cell Size |
5.86 (H) x 5.86 (V) μm |
Function
|
Scanning System |
Full scanning, Variable ROI |
|
Shutter Type |
Global Shutter |
|
Scanning Mode |
Full Scanning, Variable AOI (Horizontal & Vertical) |
|
Maximum Frame Rate (Full Scanning Mode) |
1920 x 1200: 163 fps (RAW8bit), 81.5 fps (RAW10bit), 81.5 (RAW12bit). * Frame rate will drop if connected to a USB 2.0 Port. |
|
Maximum Frame Rate (AOI Mode) |
1280 x 1024: 189 fps (RAW8bit), 94 fps (RAW10bit/RAW12bit), 640 x 480: 378 fps (RAW8bit), 189 fps (RAW10bit/RAW12bit) |
|
Sync System |
Internal |
|
Video Output Format |
RAW 8bit / 10bit / 12bit (Default Raw 8bit) |
|
S/N Ratio |
< 3 digit ( Gain 0 dB) |
|
Electronic Shutter |
Exposure Time: 18.6 usec to 20 sec (Full Scanning Mode, RAW8bit), 23.4 usec to 40 sec (Full Scanning Mode, RAW10bit/RAW12bit) |
|
Gain |
- |
|
- Analog |
0 ~ 24 dB |
|
- Digital |
0 ~ 6 dB |
|
Offset (Analog) |
RAW8bit: 0 to 31 digit, RAW12bit: 0 to 511 digit |
|
ROI |
ROI (Horizontal：32 to 1920 pixels / Vertical：32 to 1200 lines); (Default: 1920 x 1200） Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction |
|
Binning |
N/A |
|
Decimation Function |
Individual x2 Horizontal, Vertical Decimation (Frame rate increases with vertical decimation, but the frame rate does not increase with horizontal decimation) |
|
ALC |
AE, AGC (Default AE: OFF, AGC: OFF) |
|
White Balance |
Auto / Manual / One-shot (Default: Manual） |
|
Mirror Image |
Horizontal / Vertical / Horizontal and Vertical (Default: OFF) |
|
Pixel Defect Correction |
Up to 64 pixels (Default: ON） |
|
Operational Mode |
Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software Selectable) |
|
User Setting Storage |
Supported |
|
Interface |
USB 3.0 Super Speed (USB 3.0 Micro B) |
|
Input / Output |
Three GPIO, One Camera Hardware Reset |
Mechanical
|
Power |
- |
|
- Input Voltage |
+5V (typ.) (Conform to USB Standard) |
|
- Consumption |
< 4.0 W |
|
Dimensions |
C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors |
|
Lens Mount |
C Mount |
|
Optical Filter |
|
|
Optical Center Accuracy |
Positional Accuracy in H and V directions: +/- 0.3 mm, Rotational accuracy of H and V: +/- 1.5 deg. |
|
Weight |
Approx. 48g |
|
Interface Connector |
USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent |
Environmental
|
Operating Temperature |
- |
|
- Minimum |
Environmental Temperature: 0°C |
|
- Maximum |
Camera housing temperature (top plate) shall not exceed 55°C |
|
Storage Temperature |
Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85% |
|
Vibration |
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each |
|
Shock |
Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each |
|
Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 |
|
RoHS |
RoHS Compliant |
Related Products
