Omron STC-MBS500U3V (STCMBS500U3V) STC-MBS500U3V-SE 5MP USB3, Monochrome Camera

Sentech has released another member of the USB3 Vision camera family. The mono STC-MBS500U3V features the Sony IMX264 5MP global shutter sensor with 35fps.

STC-MBS500U3V-SE Model Also Available

$1,050.00 Please call for pricing

SKU

STC-MBS500U3V

Overview

Sentech has released another member of the USB3 Vision camera family. The mono STC-MBS500U3V features the IMX264 5MP global shutter sensor with 35fps.

Features:

USB3 Vision Compliant
75.7 fps
2/3” 5.1M Progressive B/W CMOS
Sony: IMX250LLR-C

Specifications

Image Sensor	2/3” 5.1M Progressive Monochrome CMOS (Sony: IMX264)
Shutter Type	Global
Active Picture Element	2448 (H) x 2048 (V)
Cell Size	3.45 (H) x 3.45 (V) µm
Sync System	Free run, External trigger (Hardware, Software)
Maximum Frame Rate (Full Scan)	-
-8Bit Output	35.8 fps
-10Bit Output	35.8 fps
-10bit Packed output	35.8 fps
-12Bit Output	35.8 fps
-12bit Packed output	35.8 fps
ADC bit width	10bit / 12bit
Video Format	8/10/12 bit output (Support packed on 10bit, 12bit)
Noise Level	-
-8Bit Output	≤ 3 LSBs (Gain 0 dB)
-10bit / 10bit Packed Output	≤ 12 LSBs (Gain 0 dB)
-12bit / 12bit Packed Output	≤ 48 LSBs (gain 0 dB)
Sensitivity	380 Lux
Exposure Time	-
-8Bit Output	27.2μseconds to 56 seconds
-10Bit Output	27.2μseconds to 56 seconds
-10bit Packed output	27.2μseconds to 56 seconds
-12Bit Output	27.2μseconds to 56 seconds
-12bit Packed output	27.2μseconds to 56 seconds
Gain	-
-Analog (Gain)	0 to 20.8 dB
-Digital (Gain)	0 to 6 dB
Black Level	-
-8Bit Output	0 to 31
-10bit / 10bit Packed Output	0 to 127
-12bit / 12bit Packed Output	0 to 511
White Balance	N/A
ROI (AOI)	Horizontal: 64 to 2448 (2432 on Packed) / Vertical: 32 to 2048 Adjustable Steps for offset: 16 pixels in horizontal direction (64 pixels on Packed) / 4 lines in vertical direction Adjustable Steps for offset: 4 pixels in horizontal direction / 4 lines in vertical direction
Gamma	Gamma Table =0.1 to 4.0, Default = 1.0
Binning	Individual x2 Horizontal, Vertical Binning / OFF (Horizontal: Average, Vertical: Addition) *8
Decimation	Individual x2 Horizontal, Vertical Decimation
Image Flip	Horizontal / Vertical / Horizontal and Vertical / OFF
Pixel Defect Correction	Up to 64 points
Auto Image Control	-
-Auto Exposure	Support (Default: Fix 27.5 mseconds)
-Auto Gain	Support (Default: Fix x1)
-Auto White Blance	N/A
Operational Mode	Free-run/ Edge-preset Trigger/ Pulse width Trigger/ Start Stop Trigger
User Setting Mode	Support
Communication	Via USB3.0 bus
Interface	USB3.0 Super speed (USB3.0 Micro B)
Protocol	USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant and Sentech’s unique protocol (on Normal SDK, Trigger SDK)
Input/Output	Three GPIO, One Camera Hardware Reset
Power	-
Input Voltage	+5V(typ.) (This conforms to the USB standard)
Consumption	Max: 3.4W, Typ: 2.8W