(888) 687-6877

SE HABLA ESPAÑOL

CONTACT US

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Sentech STC-MB83USB XGA Monochrome Camera Image

Sentech STC-MB83USB XGA Monochrome Camera

Quick Overview

The STC-MB83USB is an ultra-compact, progressive scan, XGA, USB camera with a 1/3” monochrome CCD.
Overview

It features 30fps, hardware and software triggering image capture, digital zoom and a feature-rich user based menu setup and control.

1/3" CCD Image Sensor, XGA (0.8 Megapixel)
Ultra-Compact Size
Hardware & Software Trigger
Specifications

Name

Specifications

Model No
STC-MB83USB
Image Sensor
1/3” Interline XGA monochrome progressive CCD: ICX204AL (Sony)
Total Picture Element
1077 (H) x 788 (V)
Effective Picture Element
1034 (H) x 779 (V)
Chip Size
5.80 (H) x 4.92 (V) mm
Cell Size
4.65 (H) x 4.65 (V) µm
Scanning System
Progressive
Resolution
1024 (H) x 768 (V) (Full scanning) 1024 (H) x 344 (V) (1/2 partial scanning) 1024 (H) x 136 (V) (1/4 partial scanning)
Scanning Methods
Full scanning, 1/1 partial scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning, Binning scanning, Binning 1/1 partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanning, Binning variable partial scanning
Maximum Frame Rate
-
- Full Scanning
29.18 fps (Normal) / 14.59 fps (1/2 clock) / 7.295 fps (1/4 clock)
- 1/2 Partial Scanning
60.02 fps (Normal) / 30.01 fps (1/2 clock) / 15.00 fps (1/4 clock)
- 1/4 Partial Scanning
120.35 (Normal) / 60.175 fps (1/2 clock) / 30.087 fps (1/4 clock)
Pixel Frequency
29.5 MHz (Normal) / 14.75 MHz (1/2 clock) / 7.375 MHz (1/4 clock)
Video Output
8bit / 10bit / 12bit
Minimum Scene Illumination
0.54 Lux at F1.2
Sync System
Internal
Electronic Shutter
Auto / Manual (software selectable)
- Normal
1/29,500,000 to 1/29.18 seconds
- 1/2 Clock
1/14,750,000 to 1/14.59 seconds
- 1/4 Clock
1/7,375,000 to 1/7.30 seconds
Gain
Auto / Manual (software selectable)
Gamma
Manual (software selectable)
White Balance
-
Trigger Mode
Free-run / Edge preset trigger / Pulse width trigger / Start & stop trigger (software selectable)
Input / Output
USB 2.0 High Speed
Power
 
- Input Voltage
+5 Vdc through USB connector (+4.4 to +5.25V)
- Consumption
< 300 mA
Dimensions
28 (W) x 28 (H) x 37 (D) mm (excluding connector)
Lens Mount
CS mount
Weight
Approximately 45g
Interface Connector
USB: mini-B USB connector IO signal: 6pin connector (HR10A-7R-6PB or equivalent)
Temperature
-
- Operational
0 ~ 40 deg. C
- Storage
-30 ~ 65 deg. C
Vibration
20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy
EMS: En61000-6-2, EMI: EN61000-6-3 (Class B)
RoHS
RoHS Compliant
No Video available
Sentech STC-MB83USB
Request a Quote

* Required Fields