(888) 687-6877

SE HABLA ESPAÑOL

CONTACT US

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Sentech STC-CMB4MPOE | Sentech GigE | GigE Cameras Image #1

Sentech STC-CMB4MPOE 4MP GigE, Monochrome Camera (CMOS)

Quick Overview

Sentech's STC-CMB4MPOE is part of GigE Vision CMOSIS Series, and employs a 1” CMOSIS sensor that outputs 4-megapixel resolution along with 25 FPS. The camera comes in monochrome and color versions. 









STC-CMB4MPOE-Mono STC-CMC4MPOE-Color
Overview

Recently Sentech added 4 megapixel high speed models to our GigE Vision product line. With a high speed 25fps (4M) productivity can be increased with ease. Both cameras are designed for Power over Ethernet and do not require a seperate power supply.

Features:

  • 2048(H) x 2048(V) 25 fps
  • 5.5μm x 5.5μm - 1"
  • Global Shutter
  • PoE / External Power
  • 35 x 35 x 55.9 mm (excluding connector)
  • GigE Vision

Applications:
  • Security
  • Education
  • Meetings
  • Industrial
  • Inspection
Specifications
Image Sensor Type 1" 4M CMOS (CMOSIS CMV4000)
Shutter Type Global
Effective Pixels 2048 (H) x 2048 (V)
Pixel Cell Size 5.5 (H) x 5.5 (V) µm
Frame Rate 25 fps (full image size) 12.5fps @ 10-bit output 1 ~ TBD fps (with AOI settings) Max frame rate of TBDfps with V. size of 32 pixels 
Noise Level Less than 3 digits at 8-bit output (Gain=0dB) - Less than 12 digits at 10-bit output (Gain=0dB)
Minimum Scene Illumination TBD Lux at F1.2 (4M Color) TBD Lux at F1.2 (4M Mono) TBD Lux at F1.2 (4M NIR)
Video Format 8/10 bit Raw Data, RGB 8 bit (Color) 8/10 bit Raw Data (Mono, IR)
Interface IEEE802.3 (1000BASE-T) 
Protocol GigE Vision® 1.2 & GenICam™ 2.0 compliant
Exposure Time 25 μsec ~ 2,000 msec 
ALC Electronic Iris and AGC on and off 
Digital Gain 1 - 3x
Gamma 1.0 or up to loadable Gamma table
Color Interpolation Included (Color Model Only)
White Balance Auto, Manual, & Push to Set White (Color Model Only) 
Operating Modes Edge Preset Trigger & Pulse Width Trigger
Communication UART through Ethernet port
Input/Output 1 input (opt isolated), 2 outputs (3.3V LVTTL)
Input Voltage +10.8 ~ +26.4 Vdc
Power Consumption less than 3.6W
Dimensions 35 (W) x 35 (H) x 55.9 (D) mm (excluding connectors)
Optical Filter Not Included
Lens Mount C Mount
Ethernet Connector RJ45
Power & I/O HR10A-7R-6PB (or equivalent)
1/4" Mount Holes 1/4" Camera mount holes on top and bottom
M4 Mounting Holes 4 each on the top and bottom
Weight Approx. 120g 
Compliance RoHS Compliant
No Video available
Sentech STC-CMB4MPOE
Request a Quote

* Required Fields