Toshiba IKM44H Remote Head and Machine Vision Industrial Cameras

The Industrial Camera and Machine Vision Solutions Company

High Definition Cameras | Three Chip Cameras | Remote Head Cameras | Machine Vision Cameras

IKM44H
Remote-Head CCD Color Camera
<< Click here for a brochure in Adobe PDF >>

The highest resolution 1/3-inch ultra-miniature CCD color camera with new digital signal processing (DSP) features

This ultra-miniature color camera uses the latest DSP processing, combined with a 1/3-inch, 410,000-pixel CCD image sensor with advanced microlens technology to put better than 470-line horizontal resolution and a 46 db signal-to-noise ratio into a detachable camera head just 26mm (1 15/32-inch) long, 12mm (15/32-inch) in diameter

Features:

1/3-inch, 410,00-pixel CCD with micro lens technology

Minimum illumination of 10 lux at F1.6, and standard illumination of 200 lux at F1.6

Easy to use, on screen menu control

Electronic shutter with nine selectable speeds

Auto-shutter mode

Automatic tracking white balance

S-video and composite output

Automatic Selection circuit for internal and external synchronization

Simple adjustment of sub-carrier and horizontal phase

Screw-lock connector

Extension cables up to 30m (optional)

Wide choice of lenses (optional)

Specifications:

Imaging element 1/3", 410,000 pixel CCD image area sensor with microlens

Effective pixels Horizontal: 768 pixels; Vertical: 494 pixels

Resolution 470 x 350 lines (H x V)

S/N ratio 46dB

Standard subject illumination 200 Lux (F1.6 3000° K)

Minimum subject illumination 10 Lux (F1.6 3000° K)

Imaging area 4.88mm x 3.66mm (H x V)

Scan frequency 15.734kHz horizontal, 59.94Hz vertical

Scan type 2:1 interlaced

Video outputs VBS 1 Vp-p (BNC) x 1 S (Y/C separated) x 1

Output impedance 75 ohms, unbalanced

Synchronization method Internal or external (automatic switching)

External synchronization Input: VBS 1 Vp-p (BNC), 75 ohms unbalanced
Sync. frequency: ± 50ppm of NTSC standard
SC (Fine) phase: rear adjustment

White balance Auto-tracking/manual/push to set

Electronic shutter settings 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000, second
Auto mode to 1/50,000 second

Sensitivity/AGC switching Sensitivity boost (+6dB)/AGC on-off

Operating temperature -10°C to + 40°C, +14° to 104°F

Operating humidity < 90%

Accessories supplied Instruction manual, camera holder

Operating accessories Lenses: 3, 5.5, 11, 18mm
AC adaptor, camera cables

Dimensions Camera head: 12mm x 36mm (15/32" x 1 15/32") (diam. x length)
(excl. lens and connector)
Camera Control Unit (CCU); 85mm x 40mm x 156mm (W x H x D) (3.3" x 1.6" x 6.1")
AC adaptor (optional): 116mm x 41mm x 70mm
(4 9/16" x 1 5/8" x 2 3/4") (W x H x D)

Weight Camera head: 9g (1/3 ounce) (excl. lens)
Camera Control Unit (CCU): 390g (.86 lbs)

Power source DC 12V (mating connector: HIROSE HR10A-7P-4S)

Power consumption 5.0 watts