The Industrial Camera and Machine Vision Solutions Company










Compliance
  ROHS Compliance
  Export Compliance


  >> Site Map




 

 
Call us Toll Free
 
 
 
Home  |  General Information  |  Find a Rep  |  Trade Shows  |  Order  |  Contact  

GigE  |  Security  |  Smart  |  Firewire   |  3 Chip |  Color  |  CameraLink  |  PTZ  |  Progressive Scan   | Analog  |  Block  


Sony - Industrial and Machine Vision Cameras
FCB-EX48E/P
Color NTSC/PAL Block Camera
(view product brochure in ADOBE PDF - coming soon)


Sony FCBEX48E-P


Sony is expanding its popular FCB block camera series with the introduction of eight new E Version block cameras. FCB-EX48E & FCB-EX48E/P cameras combine superb picture quality with high zoom capabilities ranging from 18x to 28x. The FCB E cameras are equipped with IP-ready digital output and enhanced white balance functions compared to prior FCB models.

Replacement camera for FCB-EX48C/P, FCB-IX47C/P, FCB-IX45C/P

NEW FEATURES & BENEFITS

Digital Output (ITU-R BT656) : By using the digital interface, the quality of the camera's video signal does not deteriorate. This can lead to cost savings due to the direct connection to codecs/systems without the need for any additional components.

Temperature Readout : The value of the internal temperature of the FCB E Version cameras can be read out via the VISCA™ protocol. When checking the internal temperature of equipment (i.e., speed dome unit), it is possible to use this data to turn a fan or heater on/off inside the equipment as needed.

Color Enhancement : Ideally suited for low vision applications, new color enhancement options can make reading text and pictures less challenging. Available options include monochrome, binary, inverted and enhanced color modes.


OTHER KEY FEATURES:

  • White Balance: Auto Outdoor mode, Sodium Vapor Lamp Mode
  • Auto Wide-D Mode
  • 2D/3D Noise Reduction
  • Auto ICR
  • Spherical Zone Masking
  • Motion Detection
  • Alarm
  • Slow AE response
    		•

    FCB-EX48E/P Features *

    Specifications

    		 FCB-EX48E FCB-EX48E/P

    Image sensor
    ¼ type EXview HAD™ CCD (Progressive Scan)
    Signal system
    NTSC
    PAL
    Number of total pixels
    380,000 pixels
    440,000 pixels
    Lens
    18x optical zoom, f=4.1 mm (wide) ~ 73.8 (tele)
    Digital zoom
    12x (216x with optical zoom)
    Horizontal Resolution
    550 TV Lines
    Angle of view (H)
    48.0° (wide end) to 2.8° (tele end)
    Minimum Working Distance
    10 mm* (wide) ~ 800 mm (tele) *Default: 290 mm
    Video Output Analog: VBS: 1.0 Vp-p (sync negative), Y/C
    Digital: Y/Cb/Cr 4:2:2 (ITU-R BT656 Style)
    Sync system Internal / External (V-lock)
    Minimum illumination 0.7 lx (typical) (F1.4, 50 IRE)
    S/N ratio More than 50 dB
    Camera Control Interface VISCA (TTL signal level) Baud Rate: 96Kb/s, 19.2 Kb/s, 38.4
    Kb/s Stop bit: ½ bit selectable
    Electronic shutter 1/1 to 1/10,000 s, 22 steps
    White balance Auto, ATW, Indoor, Outdoor Auto, Sodium Vapor Lamp
    (fix/auto), One-push, Manual
    Gain Auto / Manual/Max. Gain Limit (-3 to 28 dB, 2 dB steps)
    AE control Auto, Manual, Priority mode (shutter priority & iris priority)
    Bright, EV compensation, Slow AE
    Wide-D Dynamic Range Auto Mode
    IS/PS Mode
    Focusing system Auto (Sensitivity: normal, low), One-push AF, Manual, Infinity, Interval AF, Zoom Trigger AF, Focus Compensation in ICR On Mode
    Storage temperature '-20℃ ~ 60℃
    Operating temperature '-5℃ ~ 60℃
    Power requirements 6.0 V ~ 12.0 V DC
    Power consumption 2.6 W (motors active: 4.4 W) * tentative
    Weight 230 g
    Dimensions 52.0 (w) x 57.5 (h) x 88.5 (d) mm

    * Features and specifications subject to change without notice. Non-metric weights & measurements are approximate.

     

    << Our Industry Blog - Nicole's >>
    © 2012 Aegis Electronic Group Inc., All Rights Reserved.