Sony is expanding its popular XCG GigE camera series with the
introduction of a new high-quality, high-sensitivity monochrome
camera. The new XCG-H280E incorporates a 2/3-type EXview
HAD II™ CCD sensor which provides greater sensitivity in the
visible and near-infrared wavelengths than previous models.
In addition to inheriting some of the unique features of Sony's
XCD Series such as Bulk Trigger and Sequential Trigger modes,
the XCG-H280E features a full-HD high frame rate image-transfer
capability with 8-, 10-, or 12-bit video data output.
The XCG-H280E incorporates the GigE Vision® interface standard
based on Gigabit Ethernet technology. In response to the
growing demand for large-scale systems, this interface enables
the camera to transfer a large amount of data over long
distances. The use of an Ethernet cable and the availability of a
wide variety of peripheral devices contribute to significant
cost-cutting benefits when designing a complete vision system.
By utilizing the features and benefits of the GigE Vision interface,
the XCG-H280E camera is ideally suited to the demanding
requirements of ITS (Intelligent Transportation Systems) and
machine-vision applications.
The XCG-H280E incorporates a 2/3-type EXview HAD II CCD Sensor, providing greater capability of capturing clear images in low-light environments.
With the addition of an infrared strobe, the camera's high-sensitivity in near-infrared wavelength delivers outstanding picture quality.
The XCG-H280E also features a full-HD high frame rate and image transfer capability with 8, 10, or 12-bit video output.
Specifications
XCG-H280E
Camera
Image sensor
2/3-type progressive scan IT CCD
Sensor technology
EXview HAD II CCD
Standard resolution (H x V)
1,920 x 1,080
Full resolution (H x V)
1,920 x 1,440
Standard frame rate
32 fps at standard resolution (2ch readout)
Cell size (H x V)
4.54 x 4.54 μm
Minimum illumination (50%)
0.5 lx (F1.4, +18 dB, Shutter: OFF)
Sensitivity
400 lx at F8 (0 dB)
Gain
Auto, Manual : 0 dB to +18 dB
Shutter speed
2 sec to 1/100,000 sec
Camera Features
Readout modes
Normal, Binning (2 x 2, 1 x 2, 2 x 1), Partial Scan
Readout features
Gamma (variable), Built-in test pattern
Synchronization
Hardware trigger, Software trigger
Trigger modes
Trigger start, Trigger start and duration, Bulk trigger and Sequential
trigger mode
Memory channel (UserSets)
16 channels
User memory
64 Byte x 16 ch
Image buffer
16 frames
Interfaces
Video data output
8, 10, 12-bit digital
Digital interface
Gigabit Ethernet (1000BASE-T)
Camera specification
GigE Vision® Version 1.2
Digital I/Os
TTL IN (2x), TTL OUT (2x)
General
Lens mount
C mount
Power requirements
DC +12 V (+10.5 V to +15.0 V)
Power consumption
5.3 W (typ.)
Operating temperature
14°F to 122°F (-10°C to +50°C)
Storage temperature
-22°F to +140°F (-30°C to +60°C)
Operating humidity
20% to 80% (no condensation)
Storage humidity
20% to 95% (no condensation)
Shock resistance
70 G
Dimensions (W x H x D)
2 x 2 x 2 3/8 inches (50 x 50 x 57.5 mm)
(Not including protruding parts)
Weight
7.0 oz (200 g)
Regulations
UL2044, FCC Class A, CE: EN55022, AS/NZ: EN55022, VCCI: Class A,
KN22/KN24: Class A
Supplied accessories
Lens mount cap (1)
Terminal block (1)
Operating instructions (1)
