Sony XCG-U100E UXGA GigE Machine Vision Camera, Aegis Electronic Group

XCG-U100E
UXGA GigE Machine Vision Camera
(view Specs in Adobe PDF)

Sony continues to be on the cutting edge of camera technology with the latest addition to its industrial camera line up. The UXGA monochrome GigE cameras incorporates the GigE Vision interface which is specifically standardized for machine vision applications based on Gigabit Ethernet technology. In accordance with the growing demand for large scale systems, this interface enables the cameras to transfer a large amount of data over long distances. The use of an Ethernet cable and availability of a wide variety of peripheral devices contribute to significant cost-cutting benefits when designing a complete vision system.

High Resolution & Frame Rates
Superb Picture Quality – These new cameras incorporate a progressive scan IT CCD providing outstanding picture quality and high resolution images.
Progressive Scan CCD
Variety of trigger modes
GigE Vision compliance (Ver 1.0)
Power on LED settings
Compact & Lightweight: 44 x 33 x 67.5mm/ 145g.
Sony Image Filter Dedicated Driver
Sony Image Filter Dedicated Driver

Specifications

	XCG-U100E
Image Device	1/1.8-type
Cell Size (H x V)	4.4 x 4.4 μm
Std. Picture Size (H x V)	1,600 x 1,200
Std. Frame Rate	15 fps
Sensitivity - 0dB	400 lx at F5.6
Min. Illumination F1.4 +18dB	1 lx
SNR	Less than 1 step
Bit Depth	8/10/12-bits (Default: 8)
Lens Mount	C Mount
Digital Interface	1000Base-T (GigE Vision Ver. 1.0 compatible: TBD)
Gain Control	Manual (0 to +18dB, Fine) Auto Gain Control Digital Gain (1x to 2x)
Binning (*1)	1x2 (vertical only)
Partial Scan	Vertical: High-rate scanning Horizontal: SDRM scanning
Shutter Speed	10 μs to 2s (1 μs step) – Free run/Trigger mode
Trigger Mode	Trigger Mode: Edge detection Pulse width detection (Min. pulse width: 10 μs) Special Trigger Mode: Bulk/Sequential trigger mode
Trigger Type	Hardware/Software trigger
Strobe	Polarity change/Change of pulse with Delay (1 μs to 4 ms, 1 μs step)
DSP: Digital Pedestal Digital Gain Gamma LUT Binarization Built-in Test Patter	0 to 2,047 step 1 x to 2 x (6 dB) Normal (Linear)/Reverse/Binarization/User Setting 4,095 step (12bit) Grey Scale can be output
Dimensions	44 x 33 x 67.5 mm
Mass	Less than 145g
Power Consumption	3.1W
Operating Temperature	-5 to +45 °C
Storage Temperature	-30 to +60°C
Operating Humidity	20 to 80% (non-condensing)
Storage Humidity	20 to 95% (non-condensing)
Vibration Resistance	10G (20 to 200 Hz)
Shock Resistance	70G
Supported Cable	Cat 5e or higher