|
|
The STC-TB202USB is a compact, progressive scan, UXGA, USB cameras with a 1/1.8" Monochrome CCD, featuring 15fps (UXGA), software triggering, image capture, digital zoom and a feature-rich user based menu set up and control. This series is available in a board or cased version, with a top or rear USB connector. Sentech USB cameras include a SDK, Direct X, Twain and Linux drivers, as well as the Sentech Viewing Software.
|
| Signal Format |
UXGA Monochrome |
| Image Sensor: |
1/1.8” CCD |
Minimum Frame Rate:
|
Full Scan |
15.32 fps
|
1/2 Partial Scan |
30.63 fps
|
1/4 Partial Scan |
61.27 fps |
| Total Picture Element: |
1688(H) x 1248(V) |
| Effective Picture Element: |
1628(H) x 1236(V) |
Active Picture Element:
|
Full Scan |
1600(H) x 1200(V)
|
1/2 Partial Scan |
1600(H) x 548(V) |
1/4 Partial Scan |
1600(H) x 208(V) |
| Chip Size: |
8.50 (H) x 6.80 (V) mm |
| Cell Size: |
4.40 (H) x 4.40 (V) µm |
| Pixel Clock Frequency: |
36.818MHz |
| Scanning Method: |
Full, Partial scanning (1/2, 1/4), Variable |
|
| Sync System: |
Internal Sync |
| Scanning System: |
Progressive |
| Shutter Speed: |
Auto / Manual (Software Selectable) |
| Minimum Illumination: |
9.5 Lux at F1.2 |
| Gain: |
Auto / Manual (Software Selectable) |
| Gamma: |
Manual (Software Selectable) |
| Lens Mount: |
C Mount |
| White Balance: |
Auto / Manual / One-shot |
| Video Output: |
USB 2.0 High Speed |
| Shock and Vibration: |
Vibration: 10G (20 to 200Hz)
Shock: 70G (3 Directions, 3 Times Each) |
| Power: |
Input Voltage
|
+5 V through USB port |
Consumption |
< 500mA |
Temperature:
|
Operating
|
0°C ~ 40°C (32F° ~ 104°F) |
Storage |
-30°C ~ 65°C (-29°C ~ 149°C) |
| Dimensions: |
51 (W) x 51 (H) x 44.3 (D) mm (2” x 2” x 1.74”) |
| Weight: |
Approximately 145g (55.114oz) |
|
