|
|
|
The STC-CL33A is a full featured, cost effective VGA progressive scan digital Camera Link® cube camera with 1/3" CCD with Monochrome. Featuring a full frame 90fps VGA output, partial scanning, triggering, and reset capabilities.
|
| |
| Image
Sensor: |
1/3" interline VGA monochrome progressive CCD: ICX424A |
| Signal Format:
|
Progressive |
| Effective Picture
Element: |
692 (H) x 504 (V) |
| Active Picture
Element: |
648 (H) x 494 (V) |
| Chip Size: |
5.79 (H) x 4.89 (V)
mm |
| Cell Size: |
7.4 (H) x 7.4 (V) µm
|
| Horizontal Drive
Frequency: |
36.8181MHz |
| Horizontal Frequency: |
15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHzNo |
| Vertical Frequency:
|
31.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hz |
| Minimum Illumination:
|
1 Lux @ F1.4 |
| Sync System: |
Internal/External |
| Scanning System:
|
Progressive |
| Scanning Method: |
Full scanning, Partial full scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning, Binning, Binning partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanning, Binning variable partial scanning |
| Frame Rate: |
90fps (At Full Scan)
|
| Gamma: |
1 |
| Gain: |
AGC/Adjustable Fixed
Gain |
| Electronic Shutter: |
Variable, Can be set
at H and Clock |
| Trigger
Shutter: |
Pulse Width Trigger(V
Reset, Non Reset)
Edge Preset Trigger (V Reset, Non Reset) |
| Video Output: |
Digital 8 or 10 bit Camera Link (Base configuration) |
| Lens Mount:
|
C Mount |
| Power Supply:
|
12V DC |
| Power Consumption:
|
Less than 1.8 W |
| Performance Temperature:
|
0°C ~ +40°C
(-32° F ~ + 104°F) |
| Operating Temperature:
|
-5 to 50 deg. C, RH: 0 to 85% (No condensation) |
| Storage Temperature:
|
-30 to 65 deg. C, RH: 0 to 90% (No condensation) |
| Weight: |
Approximately 52 g (Camera: 43 g, tripod: 9 g) |
| Dimensions: |
28 (W) x 28 (H) x 46.5 (D) mm including lens mount and the connector |
|
