|
|
|
The STC-A83A is a 1/3" monochrome progressive scan cube camera with 1024 x 768 resolution. This series features a VGA sensor with a scan rate of 30fps, analog output and variable integration shutter trigger.
|
| |
| Image
Sensor |
1/3" InterlineXGA monochrome progressive CCD: ICX204AL |
| Total picture elements |
1077 (H) x 788 (V) |
| Effective picture elements |
1034 (H) x 779 (V)
XGA: 1024 (H) x 768 (V) |
| Chip size |
5.8 (H) x 4.92 (V) |
| Cell size |
4.65 (H) x 4.65 (V) |
| Scanning system |
Progressive |
| Scanning method |
Full scanning, Partial full scanning,
1/2 partial scanning, 1/4 partial scanning,
Variable partial scanning,
Binning, Binning partial scanning,
Binning 1/2 partial scanning,
Binning 1/4 partial scanning,
Binning variable partial scanning |
| Vertical frequency (Frame rate) |
29.59 Hz |
| Horizontal frequency |
23.23 kHz |
| Pixel frequency |
29.5 MHz |
| S/N ratio (standard deviation) |
56 dB (GAIN 0 dB) |
| Minimum scene illumination |
1 Lux at F1.4 |
| Sync. System |
Internal / External |
| Video output |
1.0 Vp-p / 75Ω, DC Coupling (0V) |
| Tap |
- |
| Shutter Speed |
Dip Switch: OFF, 1/200, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/20,000 second
Communication:
OFF, 1/2 to 1/100,000 sec. (Variable at every H and clock) |
| Gain |
0 to 27 dB |
| Gamma |
1.0 |
| Input voltage |
DC12V ± 10% |
| Consumption |
Less than 1.8 W |
| Trigger mode |
Edge preset trigger (V-reset, Non-reset)
Pulse width trigger (V-reset, Non-reset) |
| Communication |
RS232 via Camera Link connector |
| Dimensions |
28 (W) x 28 (H) x 46.5 (D) mm including lens mount and the connector |
| Optical filter |
No IR cut filter |
| Optical center accuracy |
Position accuracy in H and V directions: +/- 0.31mm
Rotation accuracy of H and V:+/- 2.1 deg. |
| Tripod |
Tripod can be attached to 4 plates
(4 screws on the bottom plate,
3 screws on the other 3 plates) |
| Lens mount |
C Mount |
| Tripod |
Tripod can be attached to 4 plates
(4 screws on the bottom plate, 3 screws on the other 3 plates) |
| Operational Temp |
Temperature: -5 to 50 deg. C, RH: 0 to 85% (No condensation) |
| Storage Temp |
Temperature: -30 to 65 deg. C, RH: 0 to 90% (No condensation) |
| Vibration |
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each |
| Shock |
Acceleration 70G, half amplitude 6ms, 3 directions 3times each |
| Standard compliancy |
EMS: EN61000-6-2, EMI: EN55011 (Class B) |
| RoHS |
RoHS compliance |
|
