The Industrial Camera and Machine Vision Solutions Company








  ROHS Compliance









  >> Site Map

 

 

 











 

 

 

 

 

 




 
 
 
Home  |  General Information  |  Find a Rep  |  Trade Shows  |  Order  |  Contact  

Interlaced   |  Progressive  |   Digital  
 



Sentech - Machine Vision Cameras
STC-A33A Machine Vision Camera
Progressive Scan Cased Cameras
<< Click here for a STC-A33 brochure in Adobe PDF >>

Sentech
 


The STC-A33 is a 1/3" monochrome progressive scan cased cubic camera with 1024 x 768 resolution, 30fps, analog output and pulse variable integration shutter trigger.

 Specifications
Image Sensor 1/3" Interline VGA Monochrome Progressive CCD: ICX424AL
Total picture elements 692 (H) x 504 (V)
Effective picture elements 659 (H) x 494 (V)
VGA: 648 (H) x 494 (V)
Chip size 5.79 (H) x 4.89 (V) mm
Cell size 7.4 (H) x 7.4 (V) μm
Scanning system Progressive
Scanning method Full scanning, Partial full scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning, Binning, Binning partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanning, Binning variable partial scanning
Vertical frequency (Frame rate) 1.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hz
Horizontal frequency 15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHz
Pixel frequency 12.2727 (30fps) / 24.5454 (60fps) / 36.8181 (90fps) MHz
S/N ratio (standard deviation) 56 dB (GAIN 0 dB)
Minimum scene illumination 1 Lux at F1.4
Sync. System Internal / External
Video output 1.0 Vp-p / 75Ω, DC Coupling (0V)
Tap 1 Tap
Shutter Speed

DIP Switch - OFF; 1/200; 1/500; 1/1000; 1/2000; 1/4000; 1/8000; 1/20,000 second
Communication - OFF; 1/2 to 1/100,000 sec. (Variable at every H and clock)

Gain 0 to 27 dB
Gamma 1.0 / 0.45
Input voltage DC12V ± 10%
Consumption Less than 1.8 W
Trigger mode Edge preset trigger (V-reset, Non-reset)
Pulse width trigger (V-reset, Non-reset)
Communication RS232 via Camera Link connector
Dimensions 28 (W) x 28 (H) x 46.5 (D) mm including lens mount and the connector
Optical filter No IR cut filter
Optical center accuracy Positional accuracy in H and V directions: +/- 0.31 mm
Case Front, base and rear: Aluminum die cast (ADC12)
Cover: Steel sheet covered with zinc
CaseTripod Polycarbonate ABS
Lens mount C Mount
Interface connector HR10A-7R-6PB (Hirose) or equivalent
Tripod Tripod can be attached to 4 plates
(4 screws on the bottom plate, 3 screws on the other 3 plates)
Operational Temp Temperature: -5 to 50 deg. C, RH: 0 to 85% (No condensation)
Storage Temp Temperature: -30 to 65 deg. C, RH: 0 to 90% (No condensation)
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3times each
Standard compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS compliance



<< Our Industry Blogs - Carolynn's | Nicole's >>
© 2008 Aegis Electronic Group Inc., All Rights Reserved.