The Industrial Camera and Machine Vision Solutions Company








  ROHS Compliance









  >> Site Map

 

 

 











 

 

 

 

 

 
 
 
 
Home  |  General Information  |  Find a Rep  |  Trade Shows  |  Order  |  Contact  



Pixelink PL-A782
The all-in-one digital 6.6 Megapixel FireWire camera
designed with your industrial inspection application in mind.
(View product brochure in ADOBE PDF)

PixeLINK PL-A782 Megapixel FireWire Camera and Imaging Modules


The PL-A782 is a high-resolution, 6.6 megapixel (2208 x 3000) camera designed specifically for industrial inspection applications. Fully IIDC 1.31 (DCAM) compliant, the PL-A782 uses a standard FireWire interface for plug-and-play operation with
the host computer. The high resolution allows the camera to be used to resolve small features while maintaining a large field of view. Region of interest controls and multiple decimation modes make the PL-A782 a flexible choice. Features such as trigger and general purpose output controls add a level of functionality beyond the IIDC standard, providing excellent performance for the price. On board Flat Field Correction provides image quality similar to high-end CCD cameras.

Features

  • 6.6 Megapixel Resolution
  • Color or Monochrome
  • Easy to Use
  • Cost-Effective
  • IIDC 1.31 (DCAM) Compatible with Extended Features
  • FireWire Interface
  • External Trigger (TTL to 12 V)
  • Fully Supported by Software, for Operation "Out of the Box"

Specifications

Sensor
  • 1" CMOS 2208 x 3000 resolution (7.73 mm x 10.50 mm - 13.1 mm diagonal)
  • 3.5 µm square pixels
  • Rolling Shutter
    		•
    Pixel Size 6.0 µm × 6.0 µm, square
    Array Dimensions 7.68 mm × 6.14 mm
    Frame Rate
    in frames per second  
     ROI Size
    Max Frame Rate
    2208 x 3000
    5
    1584 x 1200
    17
    1272 x 1008
    25
    648 x 480
    88
    Performance
  • Spectral Range 400 – 1000 nm
  • FPN – TBD
  • PRNU – TBD
  • Dynamic Range – 56 dB linear (TBD)
    		•

    Triggering
    Strobe
    Flash
  • S/W or H/W (external) trigger (TTL to 12V)
  • Two user-programmable outputs that can be used stand-alone or synchronized to trigger
    • Controls

  • Exposure (0.063 ms to 2 seconds)

  • White balance and color gains

  • Brightness (black level adjust)

  • Gamma
  • Frame Rate (2 fps to max)Trigger & Strobe Modes
  • Region of Interest & Decimation
  • Pixel format 8-bit or 10-bit
    • Other Features
  • Programmable LUT
  • On-camera configuration memory
  • FPN and PRNU correction (gain/offset correction, flat field correction – per pixel)
    		•
    Compatibility IIDC 1.31
       Format 0, Modes 1, 3, 5 and 6
       Format 7
    Computer Interface

    Two FireWire (IEEE 1394) connectors allow daisy chaining of the camera
    Optical Interface
  • Standard C-mount 1" optics (Compatible with most 2/3" optics.)
  • IR cut-off protective filter
    • Mechanical Interface
  • M3 threaded holes – 4 in front plate around C-mount and 4 in camera base
    • Trigger Interface 6 pin Hirose connector
    Power Requirements
  • Power supplied over the FireWire bus
  • Max consumption – 5 W
    		•
    Size and Weight Standard Configuration (PL-A782)
    H x W x L: 1.65" x 1.97" x 4.02"
    (41 mm x 50mm x 102mm)
    Weight (without lens): 200g 
    Environmental
  • FCC Class B & CE
  • Shock – 50 G
  • Vibration – 10 G (20 to 200 Hz)
  • Temperature – 0° C to 50° C (non-condensing)
    		•
    Status LED
  • Flashing red and green
  • Signals indicate idle, operating, warning and failed status


    • FireWireTM is a trademark of Apple Computer Inc.



    << Our Industry Blogs - Carolynn's | Nicole's >>
    © 2008 Aegis Electronic Group Inc., All Rights Reserved.