The Industrial Camera and Machine Vision Solutions Company








  ROHS Compliance









  >> Site Map

 

 

 











 

 

 

 

 

 




 
 
 
Home  |  General Information  |  Find a Rep  |  Trade Shows  |  Order  |  Contact  



Pixelink PL-A774
A family of high-resolution cameras designed with your
industrial inspection application in mind.

(View product brochure in ADOBE PDF)

PixeLINK PL-A782 Megapixel FireWire Camera and Imaging Modules

The new PL-A774 combines the functionality of a frame grabber with a CMOS imager to provide a solid machine vision camera in a simple to use package. Fully IIDC 1.31 (DCAM) compliant, the PL-A774 camera uses a standard FireWire interface for plug-and-play operation with the host computer.

The PL-A774 camera is fully supported by Windows based software and drivers for Windows 2000 and XP. The PL-A774 can also be operated right out of the box with any system that supports the FireWire (IEEE 1394) IIDC 1.31 specification such as Linux, National Instruments LabVIEW, and a host of other applications.

The camera's rich set of features and capabilities can all be controlled through software. In addition to standard camera features, the PL-A774 provides on-board Look Up Table (LUT) and illumination correction.

The PL-A774 provides fast frames rates at full resolution, up to 20 fps. This camera features a user-definable Region of Interest (ROI) with faster frame rates for smaller ROI. This camera will produce a frame rate of 100 fps at VGA resolution.

Specifications

Resolution 1600 x 1200
Sensor ½” (8.40mm diagonal)
Pixel Size 4.2 µm
Color/Mono Color
Shutter Type Rolling
Frame Rate Programmable up to
       2048 x 1536 n/a
       1600 x 1200 20
       1280 x 1024 28
       1024 x 768 44
       640 x 480 100
Spectral Range 400 – 700 nm
FPN TBD
PRNU TBD
Dynamic Range >61dB
SNRMax >44db
Triggering S/W or H/W (external trigger – TTL to 12V analog)
Strobe/Flash Two user programmable outputs
Controls  
       Image Exposure, White Balance, Brightness, Gamma, Frame Rate, Trigger &Strobes, ROI
       Pixel Addressing Decimation, Resampling, Averaging or Binning (off-chip) by factors of 2 or 4
       Pixel Format 8 or 10 bit (YUV4:2:2 or Raw Bayer)
IIDC (DCAM) compatibility IIDC (DCAM) 1.31
Computer Interface FireWire (IEEE 1394)
Optical Interface Standard C-Mount
Mechanical Interface M3 threaded holes – 4 in face plate and 4 in camera base
Trigger Interface 6 pin Hirose connector
Power Requirements Power supplied over the FireWire bus. Max consumption 4W
Size & Weight H x W x L: 35mm x 50 mm x 100 mm (190g)
Environmental FCC Class B and CE, Temp 0º C to 50º C (non-condensing)

FireWireTM is a trademark of Apple Computer Inc.



<< Our Industry Blogs - Carolynn's | Nicole's >>
© 2008 Aegis Electronic Group Inc., All Rights Reserved.