| Imaging
device |
1/2-inch
progressive scan interline CCD |
| No.
of effective pixels |
659(H)
× 494(V) |
| Unit
cell size |
9.9(H)
x 9.9(V) m ( Square pixel ) |
| Scanning
area |
7.48(H)
× 6.15(V) mm |
| Color
fi lter |
R,
G, B primary color mosaic fi lters on chip |
Scanning
system
(Selectable by switch) |
Progressive
scan ( VGA mode )
2:1 interlace scan ( NTSC mode ) |
| Frequency |
Horizontal:
31.468 kHz Vertical: 59.94 Hz |
| Sync
system |
Internal
/ external ( HD/VD auto selection ) |
| Internal
sync output |
HD/VD/SYNC
2 Vp-p/75 , Negative polarity
WE: 5 Vp-p, Negative |
| External
sync input |
HD/VD
2 to 5 Vp-p, Negative polarity
EXT. Trigger input: Low 0 VDC, High 2 to 5 VDC |
| Video
signal output |
RGB
output (G on SYNC)
Y/C output ( Only at the NTSC mode )
VBS output ( Only at the NTSC mode) |
| S/N
( Y signal ) |
More
than 50dB ( AGC, enhancer and gamma off ) |
Resolution
( Y signal at center ) |
Horizontal:
440 TV lines
Vertical: 480 TV lines ( VGA mode ) 350 TV lines
( NTSC mode ) |
| Standard
sensitivity |
2,000
lx ( F5.6, 100IRE ) |
| Minimum
illumination |
10
lx ( F1.4, AGC ON, 50IRE ) |
| Sensitivity
selection |
Gain
Adjustable at AGC OFF and AGC Limit Gain |
| Electric
shutter speed |
Selectable
in 11 steps high spped shutter
OFF(1/60), 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000
1/10000, 1/20000, 1/30000, 1/50000 second
: Approx. 1H steps from 1/60 second to 1/10,000
second |
| Auto
level ontrol [ALC] |
(
The auto level control system of AES, lens iris
and AGC. )
AVERAGE / PEAK&AVERAGE / AREA
( Scanning area is selectable from 9 area. ) |
| Auto-iris
lens outputs [DC/VIDEO*] |
DC
( Iris control voltage input type lens, cable
length over 150mm )
: Coupling coil impedance Damper : 1,150 ±10%
, Drive : 190 ±10%
Power supply : 12 VDC, 60 mA
Note :. "VIDEO" is optionally. |
| White
balance |
Selectable
in 3 modes
Auto-tracking[ATW]:2,500K~6,000K
preset [AWC] : (2,500K~10,000K)
R/B gain manual control [MANUAL] (2,500K~10,000K) |
| Text
display |
24
alpha-numeric characters in one line (only KP-FD30) |
| Picture
adjustment |
Modes
and settings can be selected and adjusted from
on-screen menu (only KP-FD30) |
| Remote
control |
Modes
and settings can be selected and adjusted from
PC
by RS-232C level, |
| Power
supply |
12
VDC ± 10 %
Approx.360 mA(KP-FD30) pprox.370mA(KP-FD30CL)
(Including 60mA for auto-iris lens ) |
| Lens
mount |
C/CS
mount ( Frange-back adjustment ) |
| Ambient
temperature |
Operating
: -10 to +50 C, (+14 to +122 F) 30 to 80 %RH
Storage : -20 to +60 C(-4 to +144 F), 20 to 90
%RH |
| Vibration
endurance |
68.6
m/s2 ( 10 to 200Hz, 30 minutes each on XYZ axes
) |
| Shock
endurance |
490
m/s2 ( vertical, horizontal, once each face ) |
| External
dimensions |
58(W)
x 58(H) x 48(D) ( not including lens and protrusions
) |
| Mass
|
Approx.220g
( without lens ) |
