piA1000-48-gm/gc High Speed, High Quality 12 GigE Gigabit Ethernet Camera (view Specs in Adobe PDF)
Key Features:
The Basler pilot camera family is based on four selected Kodak CCD
sensors and one Sony CCD sensor for exceptional image quality.
Equipped with a GigE Vision compliant interface, these cameras take
maximum advantage of Kodak and Sony sensor technology and can
often substitute for more cost-intensive Camera Link cameras and
frame grabbers. Because Basler pilot cameras use the same sensors
currently used in existing Camera Link cameras, no optics changes
are required.
For more flexibility, this series offers additional software features
that can be integrated into the image processing software on a
remote computer.
Your benefits from the Basler pilot family include:
Resolutions from VGA to 5 megapixels
100 meter cable lengths provided by Gigabit Ethernet to give you the highest flexibility
Free GigE Vision compliant driver package with performance
and filter drivers
Smallest housing in its class with a 29 x 44 mm footprint
An easy replacement for Camera Link cameras (e.g., no change
of lens)
Cost-effective Gigabit Ethernet interface does not need a
frame grabber
Compliant with the newest vision industry standards including
GenICam, GigE Vision, and EMVA 1288
100% quality checked and calibrated to give you consistent
performance and reliability
piA1000-48-gm/gc Specifications *
Pilot Series
Camera
Sensor Size (H x V pixels)
1004 x 1004
Sensor Type
Kodak KAI-1020
Sensor Readout
Progressive Scan CCD
Pixel Size (µm)
7.4 x 7.4
Max. Frame Rate
(at full resolution)
48 fps
Mono / Color
Mono / Color
Data Output Type (Interface)
Gigabit Ethernet (GigE Vision compliant)
Pixel Data Formats
Mono 8: 8 bits/pixel Mono 16: 12 bits/pixel YUV 4:2:2: 16 bits/pixel average
Raw 8: 8 bits/pixel (R,G or B) Raw 16: 12 bits/pixel (R,G or B) and packed formats
Synchronization
Via external trigger, via software trigger, or free run
Exposure Control
Programmable via the camera API
Mechanical / Electrical
Power Requirements
12-24 VDC; via Hirose 12-pin connector (max. 10 meter cable lengths)