Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Pleora iPORT CL-U3B (903-0007) External Frame Grabbers
Enhance Vision Systems with Pleora iPORT CL-U3 External Frame Grabbers
Pleora’s iPORT™ CL-U3B External Frame Grabbers provide systems manufacturers and integrators with cost and design flexibility advantages by converting Camera Link® cameras into native USB3 Vision™ cameras. With these external frame grabbers, Camera Link cameras can transport high-speed imaging and video data over the widely available USB 3.0 bus. The cameras can also be used with a broader selection of smaller form factor, low-power computing platforms to help reduce system costs. The CL-U3B family transmits video from Base and Medium mode Camera Link cameras with low, predictable latency over a USB 3.0 link. The connection at the workstation is a standard USB 3.0 port, eliminating the need for a desktop computer with an available peripheral card slot for a traditional frame grabber. As a result, designers can reduce system size, cost, and power consumption by using computing platforms with smaller form factors, such as laptops, embedded computers, and single-board computers. Integrated PLC and GPIO capabilities allow end-users to control, trigger and synchronize cameras and other vision system elements. Pleora’s CL-U3B External Frame Grabbers help systems manufacturers and integrators to leverage the performance attributes of USB 3.0, including high-bandwidth output, power over cable, and plug-and-play usability. The iPORT CL-U3B External Frame Grabber family delivers a range of solutions for designers to meet specific system requirements, including products supporting extended temperature operating range, extensive GPIO functionality, and power over Camera Link (PoCL). The CL-U3B complies fully with the USB3 Vision and GenICam™ standards, ensuring interoperability with third-party equipment in multi-vendor environments. The CL-U3B is bundled with Pleora’s feature-rich eBUS™ SDK application toolkit.
- Transmits video from Camera Link Base or Medium mode cameras over USB 3.0, with low, predictable latency
- Plugs into a wide range of computing platforms without needing a PCI/PCIe frame grabber
- Compact and low power
- Mountable enclosure
- Line scan and area scan modes
- 128 MB frame buffer to accommodate multi-mega pixel sensor sizes
- Throughput approaching 3 Gb/s
- Record and playback functionality
- USB3 Vision and GenICam compatible
- Power, control, and video over the same USB 3.0 cable
- Power over Camera Link (PoCL) with models CL-U3B-IND and CL-U3M-IND (external power supply required)
- Sophisticated on-board programmable logic controller (PLC) allows users to precisely measure, synchronize, trigger, and control the operation of other vision system elements
Applications:
- Vision
- Microscopy
- Medical Imaging
- Military Imaging
|
iPORT™ External Frame Grabber |
•Highly reliable, 3 Gb/s data transfer rate with low, end-to-end latency |
|
eBUS™ SDK |
•Driver installation tool |
|
USB3 Vision and |
•Fully-compatible firmware load •Guarantees delivery of all packets •Comprehensive data transfer diagnostics |
|
Tap Support |
•Base mode: 1 and 2 taps •Medium mode: 1,2, and 4 taps |
|
Tap Geometry |
•1X_1Y, 1X2_1Y, 1X, 1X2, 1X4_1Y, 1X4 |
|
Video Modes |
•Mono, Bayer GR, Bayer RG, Bayer GB, Bayer BG, RGB, BGR, Sparse Color Filter Pattern |
|
Pixel Depth |
•8, 10, 12, 14, 16 bits |
|
Pixel Clock |
•20 MHz to 85 MHz |
|
Frame Buffer |
•128 MB |
|
USB 3.0 based |
•Connection to low-cost, easy-to-use equipment |
|
Programmable Logic Controller |
•Advanced image capture control |
|
GPIO |
•4 TTL/LVCMOS inputs |
|
GPIO (CL-U3x-IND models only) |
•2 RS-422/HVTTL/24V/30V differential or single-ended inputs |
|
Size (L x W x H) |
•38 mm X 82 mm X 51 mm |
|
Operating Temperature |
•0 °C to 45 °C •Allows synchronized capture between multiple cameras •Allows camera acquisition to track changing speeds on conveyor belts |
|
UART and RS-232 Serial Links (LVCMOS/LVTTL) |
•Serial control of camera and other devices via PC application over the GigE link |
|
Size (L x W x H) |
•117mm x 100mm x 83.5mm |
|
Operating Temperature |
•0°C-45°C |
|
Storage Temperature |
•-40°C to 85°C |
|
External Power Supply |
•4.8V to 16V (CL-U3x-IND models only) |
|
Power Consumption |
•2.5 W |
|
Video |
•SDR-26 (Mini CL) for Camera Link |
|
USB |
•10-Pin USB 3.0 micro-B Receptacle with locking screw connectors |
|
GPIO |
•Hirose 12-pin (HR10A-10R-12S) |
|
Power In |
•Power over USB cable |
|
Power Out (CL-U3x-IND models only) |
•PoCL |
|
ORDERING INFORMATION |
|
|
903-0007 |
•iPORT CL-U3B External Frame Grabber for Camera Link Base mode with 128 MB frame buffer. |
|
903-0011 |
•iPORT CL-U3B Evaluation Kit including 903-0007, USB 3.0 cable, and eBUS SDK USB stick. |
|
903-0019 |
•iPORT CL-U3B-IND Industrial-use External Frame Grabber board set without enclosure for Camera Link Base mode with extended |
|
903-0009 |
•iPORT CL-U3B-IND External Frame Grabber for Camera Link Base mode with 128 MB frame buffer, extended operating |
|
903-0013 |
•iPORT CL-U3B-IND Evaluation Kit including 903-0009, power supply, USB 3.0 cable, and eBUS SDK USB stick. |
|
903-0008 |
•iPORT CL-U3M External Frame Grabber for Camera Link Medium mode with 128 MB frame buffer. |
|
903-0012 |
•iPORT CL-U3M Evaluation Kit including 903-0008, USB 3.0 cable, and eBUS SDK USB stick. |
|
903-0020 |
•iPORT CL-U3M-IND Industrial-use External Frame Grabber board set without enclosure for Camera Link Medium mode with |
|
903-0010 |
•iPORT CL-U3M-IND External Frame Grabber for Camera Link Medium mode with 128 MB frame buffer, extended operating |
|
903-0014 |
•iPORT CL-U3M-IND Evaluation Kit including 903-0010, power supply, USB 3.0 cable, and eBUS SDK USB stick. |
Related Products
