Purchase Industrial, Security and Machine Vision cameras from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today!

(888) 687-6877

SE HABLA ESPAÑOL

CONTACT US

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • KT&C KNC-P3LR4IR 3MP Network IR Rugged Outdoor Low Profile Camera Image

KT&C KNC-P3LR4IR 3MP Network IR Rugged Outdoor Low Profile Camera

Quick Overview

2048 x 1536 Total Pixels, 3 Megapixel, 1/3" Progressive Scan CMOS.
Overview The KT&C KNC-P3LR4IR 3 Megapixel Network Camera.

Features:

  • Omni IP ‘hand free’ Plug-and-Play system: just connect to PoE switch and stream video
  • View and record 3MP resolution at up to 20FPS from 1/3” progressive scan CMOS sensor
    - 3MP images contain NINE times the pixel detail versus traditional analog images
    - At 3X digital zoom, a 3MP images display more detail than a basic analog camera
  • Real time 30FPS streaming at 1920x1080 (1080p)/1280x720 (720p)
  • Low light sensitivity of .07lux with
    - True Day/Night (ICR) for best daytime color reproduction and low/no light sensitivity
    - Low/no light coverage enhanced by 10 IR LEDs with 33 foot range
    - Smart IR Control of image contrast despite bright, close in objects in scene
  • Extensive OSD capabilities, many controlled directly from Omni IP NVR
    - Dual streaming in H.264/MJPEG with fixed/variable bandwidth control from 32Kb/s to 12.3Mb/s
    - Region of Interest allocates bandwidth to maximize resolution in priority areas within scene
    - Day/night and IR switching control by photo sensor or schedule (or disable IRs if desired)
    - In-camera detection of motion, video loss or tampering with alarm reporting to NVR
    - 3D DNR improves low light image clarity and reduces bandwidth/NVR disk utilization
    - DWDR compensates bright or unbalanced scene lighting
    - BLC specifically for handling scenes with back lit subjects
  • Lens focal length of 4mm covers 70° field of view; optional 2.8mm lens for wider view or 6mm for greater magnification*
  • Dual PoE/12VDC power
  • PoE for efficiency and convenience
    - 12VDC for legacy system upgrade or beyond PoE cable distance range
  • Operate almost anywhere: IP66 weather resistance and -22°F~140°F temperature range
  • Low profile housing is adjustable +/- 30° pan, 360° rotation, and 75° tilt for flexible wall or ceiling mounting; fits single gang electrical box
  • Support for Safari/Chrome/FireFox/IE web browsers with free plug-in
  • Customize installation with KA-LRTC1 Threaded Cap for Pendant Mount; KA-LRWM1 Wall Mount (special order); KA-BRPM1 Pole Mount; KA-BRCM1 Corner Mount for use with KA-LRWM1

  • Applications:
  • Security 
  • Surveillance/CCTV
  • Meetings
  • Industrial
  • Specifications
    Image Sensor 1/3″ Progressive Scan CMOS
    Total Pixels 2048 x 1536 3 Megapixel @ Maximum Resolution
    Day & Night True Day & Night with ICR; Controllable by light sensor or via schedule
    Min. Illumination .07lux @ F1.2, AGC on 0 Lux (IR LED On; IR may be disabled in OSD)
    IR LED 10 IR LED 850nm
    IR Distance 33 ft. (10m) Nominal IR performance depends on scene reflectivity
    Smart IR OSD Controlled Off/On
    Shutter Speed 1/30's ~ 1/100,000's
    DWDR/BLC DWDR: Off/On, Level Adjust BLC: Off/Top, Bottom, Left, Right, Center Weighted
    White Balance AWB; Locked; Incandescant, Warm, Natural or Fluorescent Light
    3D DNR Off/On, Level Adjust
    Focal Length (standard) 4mm F= 2.0 
    Lens Options 2.8mm, 6mm, 12mm
    Lens Angle 2048 × 1536: Angle of view: 86°(2.8mm), 70°(4mm), 43.3°(6mm)
    1920 × 1080: Angle of view: 98.5°(2.8mm), 79°(4mm), 49°(6mm) 
    Lens Type Fixed focal length
    Main Stream 2048x1536, 1920x1080, 1280x720
    Supported Resolutions Sub Stream 320x240, 352x240, 640x480, 704x480
    Maximum Frame Rates 20FPS@2048x1536 ; 30FPS@1920x1080 ; 30FPS@1280x720 
    Compression H.264 Main Profile & MJPEG
    Bit Rate Nominal rates from drop down: 1024, 2048, 3072, 4096, 6144, 8192 Kbps Customized rates: 32Kbps~12288Kbps
    Streaming Dual-Stream at different frame rates and bandwidth
    Region of Interest Image detail priority/enhancement for up to four user defined areas for main and/or sub stream
    Image Settings  Brightness, Contrast, Saturation, Sharpness, Hue, AGC Gain, Image rotation/mirror, 50/60Hz system, Text overlay (Name, Time/Date, Fixed Labels; adjustable for position, size, color, etc.), Privacy masking
    LAN Ethernet 10/100 Base-T (RJ-45 Type) with weather sealed shell
    Security  Multiple user access levels with password protection; Watermarking of captured video IP address filter; IEEE802.1X (Authentication)
    Protocol  IPv4, IPv6, HTTP, TCP/IP, ICMP, DHCP, DNS, DDNS, RTP, RSTP, RTCP, uPnP, IGMP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP, 802.1X, QoS, Bonjour
    Network Storage  Video upload to PC, FTP or NAS
    VMS Compatibility  ONVIF, PSIA, CGI, ISAPI
    Supported Browsers Internet Explorer, Chrome, FireFox, Safari (with O/S compatible plug-in)
    Video Motion Detection With arming schedule and multiple actions: notify NVR, send email, upload to FTP, trigger alarm output 
    Alarm Triggers Intelligent video Motion Detection, Video Loss, Tampering
    Alarm Events Notify NVR, send email, upload to FTP, trigger alarm output
    SD Card Slot Micro SD / SDHC / SDXC up to 64Gb
    Angle Adjustment Pan: -30°-30°, Tilt: 0~75°, Rotation: 0-360°
    Power PoE class 3 (IEEE 802.3af)
    12VDC +/- 10%
    5W nominal; 7W IR LED on 
    Interface 8P/8C RJ-45F for Network and PoE - Power (DC 12V) Input
    Environmental IP66 (Weather Resistant); IK10 Vandal Resistant
    Operating Temperature -22 °F ~ 140 °F (-30 °C ~ 60 °C)
    Dimension  3.91” x 3.81” x 2.09” (99.3 x 96.6 x 52.9mm)
    Other Fits single gang electrical box
    Weight .55 lbs. / 250g
    Mounting Options KA-LRTC1 Threaded Cap for Pendant Mount; KA-LRWM1 Wall Mount (special order); KA-BRPM1 Pole Mount; KA-BRCM1 Corner Mount for use with KA-LRWM1
    No Video available
    KT&C KNC-P3LR4IR
    Request a Quote

    * Required Fields