Purchase Industrial, Security and Machine Vision cameras from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today!

Aegis Electronic Group Inc.
Your leading global industrial camera solutions company since 1989

(888) 687-6877
SE HABLA ESPAÑOL
CONTACT US

Product was successfully added to your shopping cart.

Hitachi KP-M20

Quick Overview

Ultra compact, High Sensitivity and High Resolution Rear panel switches selection
Overview

Features:

  • 570 Lines of Resolution
  • 60 db S/N
  • 0.3 lux sensitivity
  • HD/VD in or out switch selection
  • External Switches for selection of camera functions
  • Single 12 pin Hirose connector for all input / output signals
Specifications
Imaging device 1/2-inch Interline CCD
Sensing area EIA: 6.45(H) × 4.84mm (1/2 type)
CCIR: 6.47(H) × 4.83mm (1/2 type)
Pixel size EIA: 8.4(H) × 9.8(V) m
CCIR: 8.6(H) × 8.3(V) m
Total pixels EIA: 811(H) × 508(V)
CCIR: 795(H) × 596(V)
Effective pixels

EIA: 768(H) × 494(V)
CCIR: 752(H) × 582(V)

Resolution EIA : 570 TV lines (H) / 485TV lines (V)
CCIR : 560 TV lines (H) / 575TV lines (V)
Sensitivity 200L x F4 3200K Min Gain
Min. illumination 0.3Lx, F1.4 AGC, Gamma ON
S/N 60dB Min Gain
Gamma Gamma = 1.0 or correction,
External switch can be set. The Factory setting is Gamma = 1.0
Video output VS 1.0Vp-p 75ohm
Video component: 0.7Vp-p, Sync component: 0.3Vp-p Negative
Horizontal scan frequency EIA: 15.734KHz CCIR: 15.625KHz
Vertical scan frequency EIA: 59.94Hz CCIR: 50Hz
Sync system Internal/external (automatic selection)
Internal synchronization
scanning system
2 : 1 interlaced
External synchronization I/O External switch selection. Set to Input at the factory.
Input: HD/VD 4 6Vp-p Negative, Output: HD/VD 4 5Vp-p Negative
Electronic shutter 1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/120(CCIR), 1/100(EIA), 1/60(EIA), 1/50(CCIR) second
Integration mode Field or frame, External switch can be set. The Factory setting is Frame.
Lens mount C mount
Flange focal 17.526mm
Power supply 12 ± 1V DC Approx 1.4W
Ambient, operating
Ambient, storage
-10 to + 50 C (+14 to +122 F) (Note), less than 90 % RH
-20 to 60 C (-4 to +140 F), less than 70 % RH
Vibration endurance 98m/s2 ( 10 to 200Hz, 30 minutes each on XYZ axes )
Shock endurance 686 m/s2 ( vertical, horizontal, once each face )
Dimensions 29(W)×29(H)×38.5(D)mm
Mass Approx. 55g

 

No Video available
Hitachi KP-M20
Request a Quote

* Required Fields