Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

Hitachi KP-F80 PCL | Monochrome Camera Image #1

Hitachi KP-F80 PCL Monochrome

Hitachi KP-F39 PCL | Monochrome Camera Image #1

Hitachi KP-F39 PCL Monochrome

Hitachi KP-F31 PCL Monochrome

PoCL (Power over Camera Link) Camera
SKU
KP-F31 PCL Monochrome

The PoCL version is connected by a single (PoCL) Mini Camera Link cable directly to a frame grabber supporting PoCL. Simple systems construction is possible.

  • High Resolution & High Speed
    High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications.
  • Frame Shutter
    Higher resolution in the vertical directional is ensured for moving object.
  • Multi-step Shutter
    Provided multi-step shutter or variable shutter (minimum 1/100,000 second) .
  • Frame on Demand
    The trigger and the shutter can be used to capture an image at the desired timing and the accumulation time.
  • Remote Control
    Through the Camera Link interface, various setting such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
  • Imager 1/3-inch interline CCD
    Total pixels 692 (H) x 504(V)
    Effective pixels 659 (H) x 494(V)
    Active pixels 659 (H) x 494(V)
    Pixel size 7.4 (H) x 7.4 (V) µm (square lattice)
    Sensing area 4.88 (H) x 3.66 (V) mm
    Scanning system Progressive
    Aspect ratio 4:3
    Frame rate 120 frames/second
    Horizontal drive frequency 49.090902 MHz
    Scanning frequency Horizontal: 62.94 kHz
    Vertical: 119.88 Hz
    Sync system Internal
    Lens mount C mount
    Video output Digital output Camera Link
    Clk = 24.5454 MHz x 2TAP
    Resolution Horizontal: 500 TV line
    Vertical: 490 TV lines
    Sensitivity 400 lx, F4, 3200 K
    Minimum illumination 7.4 lx, F1.4, MAX GAIN
    Signal noise to ratio 50 dB
    Electronic shutter speed 1/120 to 1/100000 second (variable setting)
    Gamma compensation y = 1
    Frame on demand Fixed shutter, one trigger and VD reset (Factory setting is all off)
    Partial scan Selectable start position and width of picture grabbing in 1H step.
    Offset 0 to 128 steps level/10bit 33 steps variable (Factory setting: 0 steps level)
    Gain setting 0 to +12 dB (128 steps variable)
    Ambient temperature Operating: 0 to + 40°C (+32 to +104ºF), less than 90 % RH
    Storage: -10 to + 50°C (+14 to +122ºF), less than 70 % RH
    Power supply 12 ±1 VDC
    Current consumption Approx. 160 mA (Approx. 2.0 W)
    External dimensions 29 (W) x 29 (H) x 29 (D) mm
    Mass Approx. 50 g