Purchase Industrial, Security and Machine Vision cameras from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today! Purchase your camera needs from your representative, today!

(888) 687-6877
SE HABLA ESPAÑOL
CONTACT US

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Hitachi KP-F230 PCL Monochrome

Quick Overview

PoCL (Power over Camera Link) Camera
Overview

The PoCL version is connected by a single (PoCL) Mini Camera Link cable directly to a frame grabber supporting PoCL. Simple systems construction is possible.

  • High Resolution & High Speed
    High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications.
  • Frame Shutter
    Higher resolution in the vertical directional is ensured for moving object.
  • Multi-step Shutter
    Provided multi-step shutter or variable shutter (minimum 1/100,000 second) .
  • Frame on Demand
    The trigger and the shutter can be used to capture an image at the desired timing and the accumulation time.
  • Remote Control
    Through the Camera Link interface, various setting such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
  • Specifications
    Imager 1/1.8-inch interline CCD
    Total pixels 1688 (H) x 1248(V)
    Effective pixels 1628 (H) x 1236(V)
    Active pixels 1628 (H) x 1236(V)
    Pixel size 4.4 (H) x 4.4 (V) µm (square lattice)
    Sensing area 7.16 (H) x 5.44 (V) mm
    Scanning system Progressive
    Aspect ratio 4:3
    Frame rate 30 frames/second
    Horizontal drive
    frequency
    72.000 MHz
    Scanning frequency Horizontal: 37.5 kHz
    Vertical: 30 Hz
       
    Sync system Internal
    Lens mount C mount
    Flange focal distance 17.526 mm
    Video output Digital output Camera Link
    Clk = 36 MHz x 2 TAP
    Resolution Horizontal/Vertical: 1200 TV lines
    Sensitivity 400 lx, F4, 3200 K
    Minimum illumination 7.4 lx, F1.4, MAX GAIN
    Signal noise to ratio 45 dB
    Electronic shutter speed 1/30 to 1/100000 second
    (variable setting)
    Gamma compensation y = 1
    Frame on demand One trigger, fixed shutter and VD reset
    Partial scan Selectable start position and width of picture grabbing in 1H step.
    Offset 0 to 128 steps level/10bit 33 steps variable (Factory setting: 0 steps
    level)
    Gain Setting 0 to +12 dB (128 steps variable)
    Ambient temperature Operating: 0 to + 40°C (+32 to +104ºF), less than 90 % RH
    Storage: -10 to + 50°C (+14 to +122ºF), less than 70 % RH
    Power supply 12 ±1 VDC
    Current consumption Approx. 270 mA (Approx. 3.3 W)
    External dimensions 29 (W) x 29 (H) x 38 (D) mm
    Mass Approx. 60 g
    No Video available
    KP-F230 PCL Monochrome
    Request a Quote

    * Required Fields